When converting your angle grinder to a sander, it will be best to select the best orbital sander attachment to ensure that you can efficiently and safely sand using your angle grinder. It will also be best to consider factors like ease of installation and use, compatibility with your angle grinder, quality of make, removal rate, level of control afforded you, and many other crucial factors to consider. Standard chainsaw converter:The standard chainsaw converter is a chainsaw converter with a standard chainsaw blade attached. It is used for cutting wood, plastic, and metal surfaces.

Damaged discs, flying debris, and inappropriate attachments can lead to the grinder malfunctioning or different accidents. Based on the project you are working on, you can get the following attachments: Foam pad: The foam pad has a foam buffing compound glued to it and is used for polishing metal surfaces. 6. Angle Grinder Sanding Attachments Angle Grinders come with many attachments that can be used for various tasks. The most used Angle Grinder Attachments are: 1. Wire Brush Also attach angle grinder with the main pillar. I have used slightly longer screws for proper fitting of the angle grinder with the main pillar. Unless you have special requirements for those tasks, this 2-in-1 tool can handle general-purpose woodworking projects quite well.So, if you have a large number of logs to cut, or you are working on wood carving as your serious career, you should choose a miter saw, or a circular saw for a safer and more efficient working experience. Attachments To Turn Angle Grinder Into Other Woodworking Tools Wood saw attachment A sanding disk is a type of disk that is mounted on an angle grinder and is used for sanding metal surfaces. It is a disk that has sandpaper glued to it. There are 3 types of sanding disks, the aluminum oxide disk, and the silicon carbide disk.

This iron-free substance is ten times tougher than aluminum oxide and lasts considerably longer. Moreover, you can clean up metal welds, eliminate impurities, and flatten rough wood surfaces using these attachments. Ceramic Moreover, it is perfect for both aggressive and light sanding. You only need to replace the angle grinder disc from lower to higher grit and vice versa. The chainsaw converter is a type of attachment that is mounted on an angle grinder. It is a powerful tool that converts the angle grinder into a chainsaw. There are 2 types of chainsaw converters, the standard chainsaw converter, and the mini chainsaw converter. Segmented rim blade: The segmented rim blade is a blade guard that has segments that are used for cutting concrete, and masonry Put the washer on the front cover, then install the front cover on the angle grinder. Then, use a screwdriver to tighten it up.Continuous rim blade:The continuous rim blade is a blade that has a continuous cutting edge and is used for cutting stone concrete. Abrasive flap discs are first used in the early 1980s on angle grinders for finishing wood. They consist of several small pieces of sandpaper connected with a robust disc. Abrasive sanding discs are highly advisable for their sanding quality, material-removing capability, and longevity. Mini chainsaw converter:The mini chainsaw converter is a chainsaw converter that has a mini chainsaw blade attached to it. It is used for cutting wood and plastic surfaces. 10. Wood Carving Chisel