Do you want to learn more about how to empty a Dyson V6 vacuum cleaner? Or are you having any issues with the instructions in this article? Please use the comments section for any questions. The Dyson V6 doesn’t have an internal collar to push out clumps of dirt and hair. As a result, it’s common for some debris to remain inside the cylinder after emptying. It’s also an easy vacuum to empty, as the V6 uses a simple trapdoor system to allow dirt to fall into an external bin.

Using one of the motorised brush heads will reduce this to 15 minutes, and engaging the Max mode lowers it further to six minutes total runtime. Max mode is only really necessary for big spills, and isn’t needed for day-to-day cleaning. You shouldn’t even use the Dyson V6 to vacuum up wet materials. These materials will clog the motor, ruin the brush, and potentially break the vacuum cleaner. If the bin needs to be cleaned, you can remove it from the vacuum by pressing the same catch a second time. Once removed, use a dry cloth to get rid of stubborn debris.This is particularly important if anyone in the household suffers from allergies. Step 3: Remove Remaining Debris And Clean The Bin

However, we recommend emptying the vacuum into an outdoor bin. The Dyson V6 is a bagless vacuum, so dust and other allergens will escape into the air when you empty it. It’s best if these particles are released outdoors! For this reason, it’s important to avoid the temptation of overfilling your Dyson V6. It can be frustrating to need to empty it so often, but overfilling will greatly reduce the vacuum cleaner’s performance. The Dyson V6 has a dirt capacity of 0.4 litres. This is relatively small, so you’ll need to empty it after most cleaning sessions. It’s also smaller than the V7, V8, V10 and V11. The Dyson V6 has a “Max” fill line that’s less than halfway up the side of the cylinder. It’s important to empty your vacuum when dirt reaches this line, not when the cylinder is completely full. Newer Dyson cordless vacuums do have an internal collar to push out dirt. These aren’t perfect, but make the emptying process more hygienic. Can The Dyson V6 Bin Hold Liquids?

The final step is to close the trap door at the bottom of the cylinder. Again, you should only do this once the bin has been re-attached to the vacuum cleaner. The actual process of emptying the Dyson V6 is simple: just hold the cylinder over a bin, then press the red catch to open the trap door. Give the vacuum a small shake to dislodge more dirt.