When you encountered this "Buildplate Continues to Press down The LCD After Reaching The Bottom" problem on your ELEGOO 3D printers, or the printer does not recognize the "home" position, please follow the instructions below: Step 1 For this purpose I used 2 super strong neodymium magnets in the size 20x40x5mm, which I had lying around here and glued them with super glue on the TOP of the platform. You can easily add rafts to the model in your favorite 3D modeling or slicing software. Here’s how you can add one in Lychee slicer:

Some people take the build plate and put it in the freezer for a few minutes. The cold shrinks the model on the build plate, making it easier to remove. You can rotate the build plate and continue sanding for a more evenly sanded build plate. To know whether your build plate is sanded evenly, you should see the surface has no visible low spots with a uniform surface color. The logo on the surface is imprinted onto the bottom of the model, which can ruin its design. One user found the FUL logo on her print before she shipped it to a customer and as you can guess, that could’ve been very embarrassing.A raft also gives your model a bigger surface area to print on, increasing its adhesion to the build plate.

WB Magnetic Base with 3M adhesive resistant to harsh solvents and chemicals like resin, mean green, and isopropyl alcoholContinuous printing with a Double Wham, start another print before you start cleaning the first! The Double Wham contains: