Comply with legal requirements while catering for the practicality and need for open fire doors during normal circumstances. Watch the video to find out for your self that the Fire Door Gap Gauge is a simple to use, highly efficient “must have” tool that every inspector, fire marshal, commercial property/maintenance manager and fire department needs in their toolbox.

We supply intumescent fire and smoke stop pillows, which are made of a hard-wearing fireproof glass cloth filled with an intumescent chemical. Fire door holdersAlthough fire doors should ideally be shut at all times, this arrangement is not always practical. A fire door holder – or fire door hold open device – can be fitted to a fire door to keep it open during normal situations. These devices can be directly connected to the fire alarm or be acoustically activated by the sound of the fire alarm. Once the fire alarm is triggered, the fire door holder releases the door for closing. Dual-marked feeler gauge for measuring narrow gaps or clearances. Individual denominations in metric and imperial. Steel blades measure from 0.04-0.88mm and 0.0015"-0.035" and the brass blade measures 0.254mm and 0.01".Fire doors are a critical part of fire protection in buildings. A fire door is a type of door designed to slow the spread of fire, heat and smoke from one compartment of a building to another by isolating the compartments. Fire doors can be found in almost every commercial building and business premises. Fire doors prevent smoke from spreading throughout your building, preventing injuries from smoke inhalation and burns. Occupants inside of your building can remain safe for a minimum of 30 minutes through the use of regulation fire doors based on the fire door gap. At All Things Inspector, we are experts at developing materials that help construction crews keep up with fire door compliance. As smoke tends to travel faster than the fire itself, fire and smoke door seals act as a barrier between smoke and the interior of a building. By preventing passive inhalation at entry points, they can help protect residents from serious injury or death caused by exposure to toxic fumes during an emergency.

The Scheme is a not-for-profit organisation founded by the construction industry to improve its image. The fire door gap required varies according to the function of the door, however, best practice is to ensure that the gap:The gaps between a Fire Door and its frame need to be 2 to 4mm in width to ensure that both the door can close smoothly and that the fire cannot spread through the gap of the fire door. Our Fire Door Gap Gauge is a handy tool designed for easy use thanks to the clearly marked dark blue "Recommended Door Gap" area. In addition, the closing speed can be adjusted and holding angles can be set to between 65 ° and 105°. A fire door, when used properly and fitted with approved and applicable accessories, can save both lives and unnecessary costs. There is an array of different fire door accessories, which benefit the workplace in the following ways: Purchasing new or replacement fire doors requires accurate measurements and detailed knowledge on required materials and hardware to ensure compliance with regulations. Fire doors are a vital aspect of fire safety in any building, but they must be installed correctly and in good condition to ensure that occupants and escape routes are protected from the rapid spread of fire and smoke. Step 4– If you still require some assistance we have a couple of how to use a door gap gauge videos that you can watch.

The clearance at the underside of the bottom of a door and non-combustible surface shall not exceed 3/4 ″. Step 3– Verify that your door gap gauge that the gaps fall within the clearances outlined by NFPA 80 and change as required.For Wood Doors Swinging in pairs the clearance in between the leading and vertical edges of the door, the frame, and the meeting edges will not surpass 1/8 ″.