While wet filament usually doesn’t appear any different than dry filament while on the spool, there are a few major indicators that your 3D printing filament has absorbed moisture. Brittleness Print receipts destroy billions of trees every year. Moreover, they are bad for our health and can even cause skin cancer. In general, 3D printer filament does not have a shelf life. However, the lifespan of the filament may be shortened if it is stored in a very humid or moist environment.

Our Poly Plus boxes have the same great insulating properties as our regular poly boxes with the added extra of an outer corrugated cardboard sleeve. The cardboard outer not only adds another thermal layer of insulation from exterior elements but also helps to further protect your goods while in transit.How easy and accessible your filament storage solution is to use can make a huge difference in your user experience. A storage solution that allows you to print directly from the container is more convenient than, say, vacuum-sealed bags that only protect the filament while it’s not in use. How to Choose Desiccants for Filament Storage Rechargeability If customers have still received a physical receipt for something, they can still take a picture so that it can be integrated into the dashboard. PolyBox’s journey PolyBox™ is a filament storage box that allows you to store materials in their optimum printing environment while still being able to print with them. PolyBox™ features a thermo-hygrometer to monitor your filaments inside the box. The humidity is regulated by large desiccant bags which absorb moisture from the air inside the PolyBox™. The PolyBox™ has been specifically designed for hygroscopic materials such as PolySmooth™, PVA or PolyMide™. The PolyBox™ can house two 1kg spools simultaneously or one 3kg spool and is compatible with both 1.75mm and 2.85mm filament diameters. Key Features:

PolyBox is working closely with Ignite, Newcastle University, the National Innovation Centre for Data (NICD) and the Arrow program to improve its machine learning algorithm, develop better data analysis, and better understand the North East business needs.PolyBox’s main focus is to use receipts data and provide reports based on users’ needs. This also gives clients a better understanding of expenses, budget allocation, and how to improve the way money is spent. The box features two PTFE outlets in the lid that allow you to print with your filament while it is in the box. You can also close the outlets during the drying process or when storing your filament spool for an extended time. How PLA filament is stored is an important consideration for filament quality. It’s best practice to store filament in a filament storage container when not in use. This will help keep the filament from absorbing moisture from the air and will help maintain its quality and printability.

Image: Ken73 via Thingiverse This solution can be used with any appropriately sized vacuum bag Plastic Storage Boxes The Polymaker PolyBox ™ is a filament storage box that allows you to store and print your materials in an optimal environment. Products like the Sovol SH01 Filament Dryer make this easy, because they allow you to store filament in its airtight chamber or dry it using its built-in heating element. These types of products are essential for keeping your filaments in good condition. This can cause a lot of issues during the printing process. Your filament can snap mid-print, and if your 3D printer doesn’t have a filament sensing feature, your print will fail. It’s also easy for the filament to get jammed in the extruder during a filament change, so that is a possibility as well when you have to feed the end of the filament into the printer again. Print Quality Having built-in heating and drying features ensure that your filament dries evenly and thoroughly. These solutions are great for not only preventing moisture in your filament spools but also making them usable again in the event that they do take on too much water. Ease of UseUsing a storage solution with an airtight seal such as vacuum bags or storage boxes is key to keeping water from contaminating your filaments, but that won’t be enough if your filaments are already contaminated. You can dry your wet filaments with a dry cabinet, filament dryer, and even a food dehydrator. Some desiccants use color indication to let you know when it can no longer absorb water. This means that the beads will change color whenever they need to be dried out or replaced. This is a nice feature because it takes the guesswork out of knowing when to change the desiccant in your storage containers. That way, you won’t leave them in longer than you should and risk your filaments taking on too much moisture. Amount

The PolyBox can hold two 1kg spools or one 3kg spool and is compatible with 1.75mm and 2.85mm filament. The spools are placed on bearings and the filament is fed through one of the 6 exit holes. This means that the PolyBox is compatible with almost any printer setup. Este sistema isotérmico con control de temperatura ha sido diseñado para trabajar principalmente con productos que necesitan ser almacenados y transportados durante 72 -120 horas en tres rangos de temperatura: de 2°C a 8°C (refrigerado) y de 15°C a 25°C (ambiente). Reusable desiccants are a much more affordable solution to removing moisture from wherever you store filament than disposable varieties. Reusable desiccant can be placed in the oven, microwave, or food dehydrator to dry out and recharge each time it fills with too much moisture and can’t absorb any more. This will cut down on your waste if you require lots of desiccant to dry filament. Color Indication Our Standard Poly Box range represents the traditional polystyrene shipper that has been tried and tested for many years, delivering everything from Christmas turkeys, to farmhouse cheeses, to wet fish. Humidity monitoring measures how much humidity is in the air, which is a useful feature to have in your filament storage solution. Knowing how high the humidity is inside your dry cabinets, storage boxes, etc. can help you ensure your filaments won’t absorb moisture from the air while in storage. PriceLo que distingue a la gama de empaques Polybox es que cada diseño ha sido probado para los perfiles de temperatura de verano y de invierno de cara a garantizar el mantenimiento de la integridad de la carga útil durante todo el circuito logístico. It’s important to store filament for 3D printing in a way that protects it from moisture, since that can cause several quality issues with both your prints and your 3D printer during the 3D printing process. Nylon, PETG, and PLA filaments are especially sensitive to water and readily absorb it from the humidity in the air. Some enclosed 3D printers store their filament internally, preventing it from absorbing too much moisture from the ambient air. How do you store open 3D filaments?