The size of your pool will determine how much solar matting is required (please see the tables above for details). Where do I fit the Solar Mat? Both glazed and unglazed collector systems must include freeze protection if they'll be used in colder conditions. Selecting a Solar Pool Heater When screening potential contractors for installation and/or maintenance, ask the following questions: It can also be measured by Btu per day, which is simply the rating in Btu/(ft 2day) multiplied by the area in ft 2. Also used is kWh per day, which is the rating in kWh/(m2day) multiplied by the area in m2. Therefore, they can be used year-round in many climates. Glazed collectors also can be used to heat domestic hot water year-round.

SOLAR SWIMMING POOL HEATERS — SolarisKit SOLAR SWIMMING POOL HEATERS — SolarisKit

A flow control valve -- automatic or manual device that diverts pool water through the solar collector. Ok so that's not hot tub temperatures but it really has made our pool more enjoyable than last year with out the mats. You can determine the efficiency of a solar swimming pool heating system based on the collector's thermal performance rating if available. Basically, the surface area of your solar collector should equal 50%–100% of the surface area of your pool. In cooler and cloudier areas, you may need to increase the ratio between the collector area and the pool surface area. Adding collector square footage also lengthens the swimming season. The cheapest option out of them all, the solar mat collects sunlight on its large, mattress-like surface, and heats the water flowing through. In climates where the temperature is high, the sun is shining without any clouds, and there is no wind, the solar mat can perform relatively well. It is an ideal solution if you are looking to spend as little as possible, but this low price comes at the expense of a variety of factors.Poolsolar will not be liable for conditions resulting from a defect in a component or part which is not part of the

Solar Swimming Pool Heaters | Department of Energy Solar Swimming Pool Heaters | Department of Energy

Under standard conditions, you need to take only half of the surface area dimensions of your pool as a guide for how much solar matting you require.Designed to increase temperature of pool water by approximately 5 - 9 degrees Fahrenheit depending on weather condition Intex Pool Solar Mat is a swimming pool heating system that uses environmentally friendly solar energy to heat up above ground swimming pools. Can increase the water temperature with approximately 3-5 Celsius degrees (PLEASE NOTE: Heating performance varies depending on weather and ambient conditions. Works only if it is sunshine, will perform best in the summer months. Most of the heat is lost at night time, so using a pool solar cover will help reducing the heat loss). Easy to drain, easy to store. Simple hook up, compatible with filter pump water flow rate less than 5,678 litres / hour (1,249 gallons / 1,500 US gallons - see table below), for pumps with higher flow rate, an additional bypass system can be used to reduce the flow (not included). 3 x 1 square meters (11 square feet) surface to absorb the sun's rays. Constructed of heavy duty UV stabilized PVC. Suitable for above ground pools up to 6,600 gallons 8,000 US gallons (30,280 litres). Dimensions 1 pcs flat, before fill 47" x 47" (120cm x 120cm). Includes 3 x 1.25" (32mm) hose attachment points, 3 x adaptor A and B for 1.5" (38mm) hose connection, 3 x 0.5m (1.25"/32mm diameter) connecting hose, 3 x Bypass valve, 15 x hose clamp. Box of three solar mats. Poolsolar will not be liable for consequential damages to you home or other equipment, loss of time, inconvenience or loss of use of the solar collector. The evacuated tube solar water heater is the most expensive option out of all the solar pool heaters; however, this type of heater performs very well. They are efficient even when there are differences in temperature (between the water and the air) and can even perform in cloudy climates. You would be able to heat your pool without any problems, as the evacuated tube can reach high temperatures.

Intex Pool Heating Eco-Friendly Solar Mat,120.02 x 120.02 x 1

If you have a garden pool around 12 foot in diameter two of these (run in series) will raise the temperature by enough to make it comfortable. It will need a decent pump (look at the ones that Machine Mart sell) and not the flimsey things that come with the pools. Also use a sand filter not the paper filter things that are useless. The way the mats are constructed means that there are weak spots around the entry and exit points, keep a repair kit handy for when it happens. You will also need a few metres of 32mm flex tubing (and hose clips) to connect pool, mats and pump. There are 2 options you can have with the solar matting, the first one is 'Box A' the second is 'Box B'You'll also want a properly sized pool pump for a solar system. If you're replacing a conventional pool heating system with a solar system, you may need a pump larger than your current one or a separate, smaller pump to move the pool's water to and through the collectors. Siting a Solar Swimming Pool Heater's Collector Solar pool heater collectors should be oriented geographically to maximize the amount of daily and seasonal solar energy that they receive. In general, the optimum orientation for a solar collector in the northern hemisphere is true south. However, recent studies have shown that, depending on your location and collector tilt, your collector can face up to 45º east or west of true south without significantly decreasing its performance. You'll also want to consider factors such as roof orientation (if you plan to mount the collector on your roof), local landscape features that shade the collector daily or seasonally, and local weather conditions (foggy mornings or cloudy afternoons), as these factors may affect your collector's optimal orientation. Collector Tilt You don't have permission to access "http://www.homedepot.com/p/Intex-Solar-Mat-Above-Ground-Solar-Heater-28685E/305658007" on this server. The angle at which a collector should be tilted varies based on your latitude and the length of your swimming season (summer or year-round). Ideally, collectors for summer-only heating should be tilted at an angle equal to your latitude minus 10º–15º. Collectors for year-round heating should be tilted at an angle equal to your latitude. However, studies have shown that not having a collector tilted at the optimum angle will not significantly reduce system performance. Therefore, you can usually mount collectors flat on your roof, which might not be at the optimum angle but more aesthetically pleasing. You will, however, want to take roof angle into account when sizing your system. Determining the Efficiency of Solar Swimming Pool Heating System Some systems include sensors and an automatic or manual valve to divert water through the collector(s) when the collector temperature is sufficiently greater than the pool temperature. When the collector temperature is similar to the pool temperature, filtered water simply bypasses the collector(s) and is returned to the pool.

Swimming Pool Solar Heating Mattting UK

In this country, unheated swimming pools only reach an agreeable temperature for a few days a year, but with a solar matting system installed, you’ll be able to extend the season in which you can pleasantly enjoy your swimming pool, and will probably end up using it more than ever before!

You can significantly reduce swimming pool heating costs by installing a solar pool heater. They're cost competitive with both gas and heat pump pool heaters, and they have very low annual operating costs. Actually, solar pool heating is one of the most cost-effective use of solar energy in some climates. How They Work Poolsolar will not be liable for conditions resulting from fire, lightning, floods, winds, accidents, animal damage or other conditions above our control. The Intex Solar Mat is an energy efficient way to capture the sun's rays to heat up your above ground swimming pool. Designed to work with most Intex filter pumps, this heater is perfect for increasing your swimming session with warmer water, using environmentally friendly solar heating technology. A solar collector's thermal performance rating is measured by Btu (British thermal unit) per square foot per day: Btu/(ft 2day) High efficiency solar collectors not only will reduce your annual operating costs, but may also require fewer square feet of collector area to heat the pool. Comparing Solar Swimming Pool Heating System Costs