FloPlast operates quality and environment management systems which have been assessed by BSI and comply with the requirements of both BS EN ISO 9001:2008 Certificate No. If you have not used boss fittings before we would suggest watching our  short instructional video detailing how to use the various boss fittings that are available. Comprehensive, integrated and modern range of products and systems for all soil and waste applications. Note: Polypipe soil and waste systems are suitable for short intermittent discharges of hot and cold water in normal domestic installations in the UK. and 160mm diameter systems, manufactured to BS EN 1329:2000 and are fully compatible with other systems.

Polypipe ring seal 110mm/4" soil system offers one of the most comprehensive ranges of fitting available for residential use.

Ring Seal Soil System provides an efficient means of waste water drainage and foul discharge from appliances.

There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data. Smith Brothers have joined forces with the UK’s leading manufacturer of plastic piping systems, Polypipe Building Services, together offering outstanding service and the best products available for any project. Solvent weld boss adaptor for Short boss pipe, strap boss or access fittings to reduce down and connect to soil waste systems.The three options are as follows – 32mm Solvent Weld Pipe actually measure 1 1/4 inchs or 36mm, 40mm Solvent Weld Pipe actually measure 1 1/2 inchs or 43mm, 50mm Solvent Weld pipe actually measure 2 inchs or 56mm. Polypipe understand the challenges today’s project face and by working closely with consultants and contractors remain the number one choice for engineered products and systems within commercial building services.

Manufactured in PVC-U with push-fit joints through an innovatively designed seal and snap cap system. Fitting a solvent soil pipe adaptor is slightly more challenging than using push fit bosses – but is still a job that can be carried out with relative ease. The Solvent ABS Weld fittings from Polypipe are a lightweight yet strong way to install many types of drain systems.In addition if the term “ABS” is printed on the pipe this identifies the pipe as solvent weld waste pipe. As this information is anonymised and aggregated it cannot be used to identify any individual user actions.

Colour matching between systems facilitates colour co-ordination where sanitary pipework is located externally. The two pipes are connected securely using the adaptor by using solvent cement around the inside of of the boss fitting. EMS 538445 All products are subject to continuous quality control procedures and products manufactured to British Standard Specifications are marked accordingly.

Your boss adaptor will need to sit in a dedicated boss pipe or within the boss shoulders of the fitting that suits the job you’re carrying out – when that’s connected to the stack, you should apply your solvent cement according to the product’s instructions and make your connection. Intermittent discharges of up to 100°C may occur, provided that a duration of less than two minutes is observed. First, you should make sure you select the appropriate solvent cement for the pipes you’re working with. FloPlast offer a comprehensive choice of systems and products, in a range of sizes and colours, to suit all tastes and applications. This solvent weld boss adaptor is used in conjunction with either an SP583 Short Boss Pipe, an SP581 boss pipe or an SP319 strap boss to connect a waste pipe into a 110mm soil pipe.