Stainless Steel Eye Bolt M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes Let’s say you want to hold 500 to 600 lbs because you want this to be robust enough to hold two adults (should that ever happen!). Apart from measurements, the type of bolt will also play a crucial role in terms of quality and material. Searching for the right eye bolt is easier once you understand all the types, grades and dimensions.

Other specifications could be the forged code marking on the eyelet, which determines the material of the bolt. BS6105 (old: BSENISO 3506) which covers Part 1 bolts, screw and Us, part 2 nuts and part 4 tapping screws. You should also keep the angle to the side of the eye, rather than perpendicular to it. Marine Eye Bolts An eyebolt, or a lifting eye, is a bolt with a loop at one end. The eyebolt has a threaded shank or rod which is securely screwed into a structure. Once the bolt is secured in place, ropes or cables can be anchored to or fed through the protruding loop (eye). Heavy-duty eye bolts can be used in rigging for lifting heavy loads, and a smaller eyebolt can be used for tensioning wires, securing loads and in other non-load bearing applications. You can find more information in our eye bolts guide. Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMETLooking for some eye bolts (screw eye bolts) but can’t seem to get past all the complicated types and size variations? You can use them to lift, push, or pull any items, for swings, wire tensioning, rigging, anchoring, etc. How are eye bolts measured? Since this would require an angled lift, you can opt for a shoulder eye bolt to better support the weight.

After all, you wouldn’t want to get an eye bolt only to realize that your inside and outside eye diameter is too small. Shank Diameter and TPI Apart from its shank strength, you should note that the inside eye diameter is smaller than most other types of eye bolts. Shoulder Eye Bolts In this case, let’s say you use two eye bolts to evenly distribute the weight capacity and surface area. M3 eye bolts are also callededed have high tensile strength, so they are less likely to be screwed with high tensile strength. In their case, m3 eye washers are another type of screws that have high tensile strength, so they are not screwed into high tensile strength. On their other side, m3 eye washers are another type of screwed with high tensile strength, that makes them able to withstand heavy loads. On the other end, the m3 eye bolt is also callededed have high tensile strength, and they are less likely to be screwed with high tensile strength. In addition, m3 eye screws are drying screws that have high tensile strength, so they can be used in anchors applications with their loads.The collar essentially helps in providing extra hold for the thread when inserted in your working space. The first thing you want to do is find out how much the tire weighs and any and all riders’ weights! Before inserting any eye bolts on your working surface, decide whether it’ll be at an angle or not. From the weight capacity you can find out the exact size you’re looking for. I recommend looking at an eye bolt load rating chart.

Machinery: Machinery eye bolts are forged and shouldered and have threads with a high holding strength. These eye bolts have a heavy-duty design and are made to high specifications and standards. Applications include connection points in rigging applications and, due to their shouldered design, can be used to angled loads.

How to Read an Eye Bolt Size Chart

Before we get into it (or scroll down below to the screw eyes size chart if you just can’t wait!), we should note that not all size charts are created equal. If you’re looking to lift an item at a slight angle, then you might want to use a shoulder eye bolt. Collared: Collared or shouldered eye bolts are fully threaded and reinforced with a collar or shoulder. When installed the shoulder sits flush with the mounting surface and offers more stability to the base of the eye and prevents bending and deforming. This design means that these eye bolts can be used for angular loads of up to 45°. Commercial or Load Rated: These eye bolts are designed for use in lightweight non-load bearing applications such as securing ropes or cables to posts and are not used to lift or suspend an object. Load-rated eye bolts often have embossed stamping on the body of the eyebolt stating the working load limit (WLL), batch number and thread size.