When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. Vector images are much faster to engrave as the laser head directly follows the lines. You can not make a grayscale image though. We can see that at higher speed there is more wobbling present (mechanical) but the speed shows to have no effect on brightness of the engraved pattern. New eye protection design: the laser protective cover can protect your eyes very well filtering 97% of ultraviolet light you and the people around you can watch laser engraving without wearing goggles. Reduce your goggle expense and inconvenience of wearing goggles.

Use with another product or other damage or loss suffered by the use or combination of any other item. Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAcs system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.

Warranty Policy

A:Wood, plastic (opaque), cloth, leather, and other materials that can be burned by laser. Q:CAN I ENGRAVE METAL AND STAINLESS STEEL? Also the low hanging light shield is a bit annoying sometimes as it hangs a bit too low and it often hits the magnets I use for holding down the material. Asian Countries: Singapore, Malaysia, Japan, Thailand, Korea, Philippines, Vietnam, Indonesia and so on Extensive compatibility: The machine is compatible with all kinds of mature engraving software such as LaserGRBL LightBurn supports for Win XP / Win 7 / Win 8 / XP / Win 10 also supports for MAC system (LightBurn) engraving file format supports for NC BMP JPG PNG DXF etc.

Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support IOS system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.

Integrated stepper motor and shaft: The machine uses an integral screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the laser movement more precise and the coupling more durable. Below is the engraving of two sets of squares on the right side, one inside the other. The inner square is engraved with 1000mm/min and the inner square is at 100mm/min. Power is vaired from 10% to 100% in 10% increments and the speeds are 600, 1200, 1800 and 2400mm/min. They are a bit difficult to read under that smoke stains :) Carving materials: wood, bamboo, cardboard, plastic, leather, MDF, slate, lacquered metal, mirror stainless steel;

Photos are quite slow to engrave because the laser head must scan line by line like an inkjet printer. If you want to engrave a very large photo, prepare to wait a couple of hours :) Upgraded version of high-performance fixed-focus laser: it can engrave without adjusting the focal length; the focal spot area of the new laser is 50% smaller than that of other ordinary lasers which can take into account precision engraving and high-energy cutting at the same time. At the same time the laser power of the fixed-focus laser is more stable than that of the zoom laser. The text engraving is done at 600 mm/s which is quite fast for such small movements, and therefore some shaking of the laser head is visible in the corners. This can be easily avoided by reducing the acceleration and speed in the settings. INFRARED LASER (1064nm) Engineered for precision in both metal and plastic engraving, our technology excels across a wide spectrum of applications. Furthermore, it extends its capabilities to non-metallic materials like varnished wood furniture and ABS, showcasing its versatility and effectiveness.

 Software Download

From the results you can see that the lower the speed, the more charring occurs. Faster the seed, more passes are needed. Lightburn supports more formats: AI, SVG, DXF, PDF, HPGL, PLT, and RD for vector formats and PNG, JPEG, BMP, TIFF, TGA, and GIF for image formats.

Support offline engraving: Configure the terminal control panel to support offline engraving you can carry out engraving operations anytime and anywhere without being restricted by the computer. Cutting material: cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF, leather; Blue Laser Modules (455nm) Unparalleled cost-effectiveness makes it an ideal choice for a range of applications, including engraving and cutting various materials such as wood, acrylic, and metal.Wide compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support IOS system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. The power scale test pattern shows how the machine engraves with different power levels at different speeds. Import artwork in a variety of common vector graphic and image formats (including AI, PDF, SVG, DXF, PLT, PNG, JPG, GIF, BMP)