The device isn’t perfect of course. One of the downsides can be that it heats milk to 160 to 170 ℉ which is a little too hot. The recommended temperature for heating and frothing milk is between 130 to 140 ℉. That rapid whipping creates the milk frothing temperature and makes the milk nice and dense with lots of small air bubbles (aka a perfect microfoam). The Aeroccino froths until the milk reaches 150-160 F, which takes 60-90 seconds. Nespresso’s Aeroccino milk frother is a great buy if you’re in the market for a convenient, easy-to-use milk frother. It’s relatively compact, very quiet, fast, easy to clean, and boasts a few customizable milk froth preparations. The biggest disappointment with this model is that it’s not dishwasher safe, which is a bit of a let-down considering the two models. You will have to hand wash this frother after every use. Finally I fill it with warm water, give it a small squirtof washing-up liquid and leave it soakinguntil thenext time it is required (often 2 hours or more). By that time the washing-up liquid has usuallydissolved any minute deposits remainingon the bottom. Afterwards I give it a good rinse. Cleaning The Whisks

Costing less than a shot of hazelnut syrup, the flimsy looking PRODUKT shouldn’t work, but incredibly it's the only milk frother (aside from the pro style Dualit Cino) that gives you any sort of control over the foaming process. By controlling the distance the whisk is from the surface of the milk makes it easier to create a vortex just like a Barista would with a steam wand. The biggest difference between Nespresso Aeroccino 3 and 4 is their milk frothing options, where the Aeroccino 4 has more settings than the Aeroccino 3. But, if you are fine with the above downsides, the Nespresso Aeroccino has some of the most amazing features to offer that will be a delight for your morning coffees! Overall, both the Aeroccino 3 and Aeroccino 4 Nespresso milk frothers are great value for the money if you make milk-based coffee drinks on a regular basis. The older model Aeroccino 3 is about two-thirds the cost of the new Aeroccino 4, and might be the better value of the two if you don’t have a strong desire to pour latte art and don’t mind swapping out the two disks. You’ll get a good consistency on a milk frother, but it’s limited to the device settings. I also noticed that the milk comes out very hot on the Nespresso Aeroccino 3 — about 150-160 F, while you want 140-150 F max for steamed milk.

If you are looking for an elegant and compact device for making milk foam, read the Keurig milk frother review. This device is easy to use and clean – a nice option for busy people. Cost of Models The hot milk lone setting is the downside of this model. You can also hold the button for a cold foam, which spins the whisk for about 90 seconds with no heat (this also creates a dense texture). Their Nespresso Aeroccino Milk Frother is one of the most popular products amongst coffee lovers. It is a smart and ultra-simple Milk frother that can prepare light and creamy froth within seconds.

Both the Nespresso Aeroccino 3 and Aeroccino 4 are very easy to clean. If you decide to get the Aeroccino3, you’ll have to wipe down the unit with a damp cloth, as it isn’t dishwasher-safe. However, all of the Aeroccino 4’s components, except for the power base, are dishwasher-safe.

🍪 Privacy & Transparency

The chemical to use is descaler for removing calcium build up. Descaler can be obtained from Beterware or Lakeland. If you want just steamed milk for a flat white, you can do that, too. Press the second button for hot milk, and you’ll have piping hot milk for your drink in 150 seconds. If it is necessary to stop theNespresso Aeroccinomilk frother whilst in operation the base can be turned off with a switch on the side. Pouring The Milk Out But the most significant difference between the two machines that will be the main deciding factor for many users is that the Aeroccino 4 is dishwasher-safe, while the Aeroccino 3, well, isn’t. Aeroccino 4 feels more premium and durable because it has stainless steel casing, and the handle and spout make the pouring easier. The refreshed design is now almost identical in size to the Aeroccino 3 too.

Step 1: Detach the carafe from the base unit and remove the whisk and any other removable unit. To clean properly separate every single part including the rubber on the lid. Aupiais, S. (2018, February 19). Barista Basics: How to Texture Milk in 14 Steps. Perfect Daily Grind; Perfect Daily Grind. https://perfectdailygrind.com/2018/02/barista-basics-how-to-texture-milk-in-14-steps/ One of my commenters (Craigh) found his spiral whiskgot contaminated. I suggest that, “If a whisk gets a build up of milk or calcium on it, then try soaking it in a strong solution of bicarbonate of soda orcalcium descaler. Ahalf hour should be enough time. Brush it clean with a toothbrush.” The modern market responds to an increasing demand of milk frothers by creating a great variety of competitive products. The consumers have become overwhelmed with a range of choices offered by the brands. That can be a huge deal to some coffee lovers who want the convenience of simply throwing their machine into the dishwasher after making their cup of coffee. But, some may not care or may not have a dishwasher, so this feature may not be worth the extra cost.In many ways, the Nespresso Aeroccino 4 is a considerable upgrade from the Aeroccino 3. In terms of the overall design, added features and options, and the dishwasher-safe aspect, it’s hard not to recommend the Nespresso Aeroccino 4 to most users. With a big 700ml capacity, the Severin is great if you've got guests or thirsty and impatient housemates While it's true that many coffee machines have steam wands built-in, you'll need to spend a lot on a dual boiler design to get a built-in milk wand with as much power and consistent steam as this. I have read on the net that others have experience this problem. Maybe some whisks have the magnets fitted incorrectly during manufacture. Nespresso Aeroccino3 remains to be the top choice for a Milk frother in many households. For the price, the excellent features and benefits it offers are definitely worth it! The process of using and cleaning the device is also simple and hassle-free.

Aeroccino 4 wins in terms of ease of cleaning and maintenance. Nespresso Aeroccino 3 isn’t dishwasher safe, but Aeroccino 4 is. Aeroccino 3 has a plastic housing, and the heat from the dishwasher can release harmful chemicals. You have to handwash the Nespresso Aeroccino 3 every time you use it. Guide, N. (2022, January 11). Nespresso machines history – Nespresso Guide. Nespresso Guide. https://nespressoguide.com/2022/01/11/nespresso-machines-history/ The Nespresso Aeroccino 3 and 4 are much easier to use than a traditional steam wand. Just pour in the milk and push a button. Plus, the steam wand adds water to the milk, which doesn’t happen with a frother. Depending on whether you’re preparing simply hot milk or hot and foamed milk the Aeroccino 3 milk frother can take 240ml or 120ml of milk respectively. Which is ideal if you’re only preparing a frothed coffee for yourself.Considering that the Aeroccino 3 and the Aeroccino 4 create premium, cafe-quality foam, the Aeroccino 3 is more affordable and still an excellent value.