You can now have songs with either multiple tempos (one per part), time signatures (one per part), or both!

Every musician is different. The best looper pedal for you depends on what sort of music you make, how you make it, and what you are trying to achieve. Undo does not undo the loop decay of first base layer if overdub is undone within one cycle of the loop On converting, all your existing songs present when booting up the firmware for the first time will be automatically moved into the new ‘Songs’ folder (within the ‘Albums’ folder) in each memory device (SD, Internal)Of course, the Aeros had to be fully compatible with Singiular Sound's drummer pedal: The BeatBuddy. Using the two together is a plug and play experience.

Unlimited overdubs enable you to create layers and depth in your loops without worrying about restrictions The Aeros will only support .wav (PCM) files that are 44.1kHz and 24bit. They can be mono or stereo. The Loop decay will only engage when a new overdub layer is started, the loop decay does not apply at every loop seam. Two 1/4″ (6.35 mm) inputs, two 1/4″ (6.35 mm) outputs, one 1/4″ (6.35 mm) stereo aux input, one 1/4″ (6.35 mm) stereo aux output.

Customer Added Media

Other loopers may require external footswitches to accomplish this. With the Aeros, you can make it happen with a single, compact pedal. Amplify your guitar playing with layering Added pop-up when attempting to exit Loop Studio screen without saving changes (changes are still present, but could be lost if another song is loaded or device shut down)

We may expand the possibilities for file formats and sync rules later but this is a great first step. optional) For songs saved to the SD card: While still connected via USB, Insert your SD card into the Aeros SD card slot to access it from the computer, and follow the same process There is Bluetooth, but we have not built that feature yet however it is a good idea and we are looking into it and building it.

Singular Sound Aeros Loop Studio Gold Edition Features:

Fixed text translations (for languages other than English) that were not fitting on-screen correctly. (If you notice a translation that cannot be fully seen or could be improved upon please report/suggest on the forum or to [email protected]) We've done an overhaul of the looper's UX. Navigate menus and customize options hands-free using the Aeros wheel and buttons. Autoquantize Does Aeros support beat detection as some other loopers? Lets say I record something (w/o midi tempo), will it autodetect bpm?

You can scroll through all options (Albums/Songs) using the wheel and can interact with the selection using the buttons. The right Aeros button will open a selected album or song when it is tapped. The Aeros uses an algorithm to define the tempo of the recording you just made based on the start and stop point of your recording. Would it be possible to send two different signals to 2 different amps? One to a bass guitar amp, the other to a guitar amp. Guitar loop pedals are becoming more and more popular as practice tools, live performance centerpieces and FX hubs. In this post we explore 5 creative ways to use a loop pedal in your setup. This is possible to do in the Songs screen (inside an album) or within the Loop Studio by using the Slide Out Menu when stopped.Understanding mono and stereo goes beyond looper pedals. It's an important piece of knowledge for any musician, whether they perform live or in the studio. A mono signal Commands for looper pedals and how to use them I have used almost every major looper on the market (RC-300, Pigtronix Inifiniy, TC Electronic X4, EHX, Headrush, etc) and none of them even come close to how good the Aeros Loop Studio is. You can undo and redo both layers by holding down the RPO (Record/Play/Overdub) button – first the overdub will undo (if it exists), then continue to hold to undo the base layer. Hold and continue to hold to redo.