Yes, 60a fuse blew, this is a rewire job i`m doing, inhabited so having to install new circuits etc alongside existing so they can still have some circuits working. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item.

A range of switch disconnector fuses which are rated for on-load switching and provide isolation of the switched circuit.Just wondering if incoming supply cable size has to be considered although I see plenty of 80a fuses used with this type of supply cable. DEUTSCH DTM Series connectors provide peak connector performance everywhere data signals or critical electronic circuits are needed . Whether you're a homeowner or a contractor, the FuseBox FMS080 80A Main Switch Fused is an essential tool for maintaining the safety and reliability of your electrical systems.

various electric fan htrs/fires, a kitchen with electricgrilles, cookers etc all on the go preparing cooked breakfast.

DEUTSCH DT connectors are available in 2, 3, 4, 6, 8, and 12 pin counts and use size 16 DEUTSCH contacts, each with 13-amp continuous capacity within a single housing. Deutsch Connectors For more than 70 years, DEUTSCH products have reliably performed in some of the harshest environments. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). DTHD connectors are available in three sizes, carry 25 to 100 amps, and can be mounted or used in-line.

should be well enough, the DNO can't just upgrade everybody's fuse to 100amp, there are reasons for certain cutouts to be graded at 60, 80, or 100.Your electricity supplier owns your electricity meter and the meter tails, which connect from our fuse to your meter. It was all quite efficient with the DNO (Northern PowerGrid), about 2 weeks from request through to site survey and then install. Dishwasher, Fridge, freezer, pc etc etc, I've never drawn more that 56a so I've never worried about upgrading to a 100a fuse.