WARNING: Only use genuine Evolution blades which are designed for use in this machine. Ensure that the maximum speed of the blade is compatible with the machine. Only perform this operation with the machine disconnected from the mains supply. Also features durable die-cast aluminium base, resistant to the most demanding metallic applications. Usingthebladeslottoprovidemaximumclearanceandaccess to the machine, carefully and gently manoeuvre the blade up

Advanced performance; out performs normal saws. When cutting Steel (only in Mitre mode), it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks.g) If devices are provided for the connection of dust extraction and collection facilities, ensure that these are connected and properly used . Use of dust collection can WARNING: If any parts are missing, do not operate your machine until the missing parts are replaced. Failure to follow this rule could result in serious personal injury. RAGE3-S300 210mm Multipurpose Sliding Mitre Saw - Product Code: RAGE3S3001 (110v) / RAGE3S3002 (230v)

Hybrid Table/Mitre Saw Design: The FURY6 stands out with its convertible design. Switch between a table saw and mitre saw seamlessly, adapting to your project’s needs.The height of the Table above the machines motor can be adjusted. This enables your Fury6 to mimic the rise and fall facility found on many conventional table saws. The cutting depth of the blade can thereby be adjusted from 0mm to 32mm. be positioned to the RH side of the Cutting Head. This may be Fig. 14 necessary to avoid interference with the blade and other parts

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for regelmässig benutzen, müssen den Zustand ihrer Hände und Finger sorgfältig im Auge behalten. Sollte eines dieser Symptome auftreten, muss sofort ärztlicher Rat eingeholt werden.As with most power tools, if you're buying for use in your own home, powered by your mains electricity, you'll need to make sure you buy the 240V version, not the 110V, as this will require a transformer to operate directly off mains power. We recommend the use of an approved face mask with replaceable filters when using this machine in addition to using the dust extraction facility. workmanship. This guarantee is void if the tool being returned has been used beyond the recommendations in the Instruction Manual or if the machine has been damaged by accident, neglect, or improper service. The measurement and assessment of human exposure to hand-transmitted vibration in the workplace is given in: BS EN ISO 5349-1:2001 and Note: The Cutting Head will need to be tilted to gain access to the 45˚ Bevel Stop Adjustment Screw.

WARNING: Do not use the blade guard as a ‘lifting point’. The power cord must be removed from the power supply before attempting to move the machine. The On/Off Switch is a two (2) button latching type. The buttons are located on the Front Left Hand side of the Cutting Handle. and specifications. Electrical components are subject to respective manufacturers’ warranties. All goods returned defective shall be returned prepaid freight to Evolution Power Tools.Note: We recommend that when the Fury6 is being used as a Mitre Saw, the complete Fence Assembly is removed from the machine as stored safely for future use. Note: The Cutting Head cannot be lowered until the Cutting Head Release Lever is operated. (Fig. 11b) The Blade will remain covered by the retractable guard until the Cutting Head is released. Operation of the Retractable Guard is automatic. b) Die Messung und Bewertung der Einwirkung von Schwingungen auf das Hand-Arm-System des Menschen ist in folgender Norm enthalten: Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the machine which is not in use with Evolution’s user guide.