Having pipe and fittings in one place close to hand can save time and frustration when working with pipe

Soil Pipe Cutter: Simple & effective manual pipe cutters for cutting clay, cement and cast iron pipes. Features a chain which wraps around the pipe and is tightened, causing the pipe to cut cleanly in two. Plain end drainage pipe comes with a machine chamfer on the end of the pipe already, so manually chamfering a pipe is only required once a cut has been made. Chamfering a pipe involves creating a bevelled or rounded end to the wall of the pipe. This makes it easier to attach a drainage fitting and reduces the risk of damaging the seal connectors in the fitting. Due to the innovative design, these cutters provide a dual action of both cutting and chamfering the pipe, making it ready for installation. The mini workstation includes a clamp to hold both sizes of pipe securely while chamfering with any of the tools mentioned aboveI've often thought that there must be a way of mounting a blade (Stanley knife or similar) in a hand held device that slots over the cut edge of a plastic pipe which you then rotate within the gadget. That means that it should work on most sizes of waste pipe as it's not specific to the diameter. Handheld File: The traditional and cheapest tool for chamfering the cut end of a pipe is with a metal or wood file. Reciprocating Saws: Versatile and easy to use handheld power tools for freehand cutting of metal and plastic pipes. We have 110v electric recip saws and cordless battery-powered reciprocating saws available.

The cutting guide allows you to keep your saw flush at a 90-degree angle to the length of pipe, resulting in a square cutHydraulic Pipe Cutters: Professional pipe cutters for large steel pipes, available in a range of sizes, including 200mm and 300mm. Feature a foot pump which applies pressure to the pipe from the blade. Uses a power drive unit to drive the cutting blade. Plot drainage, for both foul water and stormwater typically involves lots of adjustments to drainage pipe From 1st April 2022, our suppliers will only fuel machines with white diesel. This is due to new government guidelines. Having a workbench at an appropriate height is better for posture and puts you in control making the saw less likely to slip when cutting The pipe guide keeps the pipe still during cutting and holds both 4-inch (110mm) and 6-inch (160mm) pipe sizes