Use a low-cost digital Hygrometer to help you keep your humidity between 55-65% this is the best environment for comfortable living. Don’t forget you can use memory setting to monitor levels of relative humidity in your building throughout the day. The warm air people breathe out while sleeping increases humidity. There's nowhere for the moist air to go when windows are closed, so it turns into condensation. Opening the window allows the warm air to escape instead. Put some charcoal or cat litter in a jar next to an area affected by damp to soak up the damp smell Condensation will often settle on external walls causing mould on walls in this classic pattern, which shows where the walls are coldest Failed Wall Ties Transom windows above a door were designed to increase airflow around a property to move heat around internally and to ventilate.

Ordinarily the spacing lugs of the Basedrain drainage channelare used to collect condensation. However,where the floor build is greater than 65mm, the drainage channelcannot be used to collect condensation from the face of the Newton wall membrane. Standard practice has been to cut a strip of wall membrane and fit it between the wall membrane and Basedrain channel to create a condensation gap to collect any surface condensation that may occur. The floor membrane is then taped to the strip of wall membrane. Don’t dry washing indoors – if you have a tumble dryer make sure it is properly vented or buy a self-condensing model. The anti-mould biocide is combined throughout the paint film and it is formulated for toughness, elasticity, water resistance and durability. Anti-Condensation Coating When the temperature goes down, the amount of moisture that the air can hold falls and the tiny drops of water form on the surface.If we insulate our homes and warm the house thoroughly, then this should not happen I hear you cry….. But unfortunately it will! Double glazing costs can mount up if you don't deal with condensation, which can be caused by a number of factors.

Using a dehumidifier is an efficient way of removing moisture from the room if you are suffering severe condensation problems. Insulation Fixing Plugs (IF90) – For fixing CDM Fibran XPS-500C insulation spacer to the slab/raft where lightweight floor finishes are to be used Sometimes, a small dehumidifier might not cut it, no matter how effective it is. After all, your living room might be large, with lots of windows and, consequently, lots of condensation on them. If so, you might have to get something as powerful as Hysure’s portable dehumidifier.For information about improving your insulation, see our expert guides on loft insulation costs and savings and cavity wall insulation costs and savings. This is the main reason people always hear the same advice, to turn on their radiators and to air their rooms more often. It is however very important to air and heats your rooms responsibly and economically. There are plenty of DIY condensation solutions that you can use in your home. They do not need to be expensive, and treatment will depend on the problems you are experiencing. As its name suggests, Hysure is portable; you can take it anywhere with you, from your home to your office. However, the best feature isn’t its portability, but its power. A single unit can collect up to 750ml of water per day at 80℃. In addition, its water tank has a capacity of 2000ml, so you can empty it once every two days. Retrofitting a ventilation system in a house is invasive and expensive and not always possible in older houses.

If you think the salting might be caused by penetrating damp then you need to find out for sure what is causing the damp. You can visit our Diagnosing Damp Project or you can consult a structural engineer. If the area is stained, treat next with a stain and damp seal paint which is also available from most DIY storesYou need to close windows and vents when you are running your dehumidifier, otherwise you will be trying to dehumidify the world. To control the Relative Humidity we need to balance heating with ventilation, or use a dehumidifier to extract moisture from the air. Condensed moisture can also react with the salts in skim plaster, masonry and stone in your walls. This can cause efflorescence or ‘salting’, which shows up as a fluffy or crystalline coating on the surface of the wall. Fitting roof ventilation tiles and/or ventilated soffits (under the roof and guttering) to allow air through the loft CDM Condensation Strip (M14) – For collecting condensation into the CDM BaseDrain and not on internal finishes