Paddling pool repair patches should be applied to clean and dry areas. You must ensure that before you apply the patch, you clean off any dirt or debris and then dry the area thoroughly.

If you are applying a patch to a hole in the water-filled section this should be placed on the outside area and not on the inside of the pool. To add extra strength to your repair, you can add a second patch on the inside of the pool. Yes, you can use sellotape to temporarily repair a paddling pool but it will only hold for a very short period of time. Sellotape does not like water and will peel off in no time at all. Whether you have an Intex paddling pool, Bestway paddling pool or another popular make of paddling pool. Finding and fixing a hole couldn’t be easier. Finding the Hole in your Paddling Pool First, you need to find the hole in the paddling pool, and then you can fix it using a suitable paddling pool repair kit. Most paddling pool repair patches need to be fixed to a dry surface and the pressure of the water or air will also cause extra pressure which may prevent the patch from adhering fully.Mould can occur if the pool is not completely dry when folded or put away. Humidity and dampness can cause mould to grow due to stagnant water.

This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy. The following steps will guide you through how to fix a hole in a paddling pool. As long as you follow the steps you will find any hole fairly simple to repair. The first part of fixing a hole in a paddling pool is finding where the hole is located. Finding a hole that is letting water out is quite simple, you just need to look to see where water is escaping. To locate the puncture on an inflatable liner it is best to apply diluted washing up liquid from a spray bottle to the surface of the whole liner and around the inflation valve. Bubbles should appear where the puncture is located. Products such as washing detergent, moisturiser, deodorant, make-up, sun lotion or fake tan can cause discolouration. We would suggest showering before using the pool to avoid this. If the problem does occur you can use washing up liquid, stain remover or miracle pads to remove stains or marks.Parcel tape can be a little better than sellotape but it will fail to work on the same principle as neither like water and will fail in a short period of time.