JENOLITE Bitumen Undercoat is a tough and robust sealer designed to coat and protect surfaces from dirt and moisture, helping to protect against corrosion. General purpose, solvent-based. waterproofing paint. Provides a hard wearing, protective layer on wood, metal and cement. Suitable for brush application only. Bituminous coating is a protection against corrosion and is typically used on steel pipelines, iron, concrete masonry, cladding, corrugated metal sheets, corrugated fiber cement/steel roofing panels and storage drinking water tanks. Or even What are the Top 10 affordable (best budget, best cheap, or even best expensive!!!) Bitumen Spray Paint available? Etc. Wear an old pair of overalls, as not matter how careful you are, you if you are like me, get covered in the stuff.

Paint | Rubber Paint | Wickes Roof Sealant Paint | Rubber Paint | Wickes

The main purpose of Bitumastic Paints is to consider the usage in the construction of water-proofings, resistance against corrosion, and applications in damp-proofing in case of various structural layouts. If the surface is metal, use a wire_brush and remove any rust formation. You can also follow other methods using mechanical devices, shot blasting, but the only thing to be keen on is the surface should be well-cleaned before applying. Apply Thinner for Galvanized surfaces Bitumastic Paint application can be made with the help of an ordinary paintbrush, roller, or conventional or airless spray. It is also used for waterproofing comprised of elastomeric bitumen, aluminum pigments, fibers, mineral fillers and volatile solvents. It can cover and enhance old waterproofing coats.It can be used as a protective coat over various materials like wood, ferrous and non-ferrous metals, and concrete layouts. Hot-Applied Coatings. These are either 100% bitumen or bitumen blended with selected fillers. A common loading for coatings employing fillers is 10% to 20% filler. Hot-applied coatings, as their name would suggest, are heated to the desired application viscosity. The majority of buried pipelines are coated with this type of bituminous coating. The application of Bitumastic Paints on some surfaces is not considered the most attractive option, for example, indoor walls.

bitumen paints - Answered Palatine Paints Questions about bitumen paints - Answered Palatine Paints

The secret to getting maximum results in applying Bitumastic Paint very easily lies in proper surface cleaning from all sorts of debris, rust, or grease. Once the surface is cleaned and dried, start applying the first coating. About certain topcoats, you are very restricted and have only a few options that can be overcoated since most of them will start bleeding through.From the heating requirement perspective, prior to the application, coating applications can fall into two classes: Bitumastic Paints have good adhesive properties to act as an excellent barricade against air and moisture penetration. Bitumastic Paints are also used to seal up wooden porous surfaces. Even it plays an excellent role in adding a layer of waterproofing to the wooden plyboards. SHAKE VIGOROUSLY Shake can vigorously before use. Apply from 15cm to 25cm in smooth strokes. For high corrosion protection, bare metal should be treated with an anti corrosion primer prior to use.