Honeywell CM707 je programovatelný pokojový termostat navržen pro přesnou a kvalitní regulaci topného systému a zefektivnění celkového vytápění. Zabezpečuje tepelnou pohodu během vaší přítomnosti i v době kdy jste mimo domu a tím i úsporu energie. b. To change Minimum ON Time, please go to parameter n. 1, category 2 in the installer set-up mode.

Press the TEMP or buttons to change the factory setting. The display will flash indicating that a change has been made. The normal upper temperature limit of 35 oC can be reduced down to 21 oC to save the homeowner energy. Surface or wall box mounting options, with trunking guides and wiring breakouts to simplify installation. The CM707 thermostat is designed to provide automatic time and temperature control of heating systems in villas and apartments. At the end of each valve you will find a lever in a slot. labelled Auto at one end and Man at the other. The lever should be at the Auto end.

The problem i have is that the radiators downstairs are constantly on regardless of whether or not the thermostat is on manual, auto, or off. This started happening out of the blue yesterday. Try moving the lever to the Man end. You should feel resistance and the lever should return to the Auto end, with a whirring sound, when released. Up to 4 daily independent time and temperature level changes let you set 4 time and temperatures pairs to suit your lifestyle.

If the thermostat is located in a hot/cold location and cannot be moved because of wiring then the measured/ displayed temperature can be adjusted by +/- 3 oC. Useful if the homeowner wants the reading to match another appliance temperature display. I have an Ideal Combi 35 boiler and 2 Honeywell CM707 Thermostats, one upstairs, one downstairs, each controlling their own set of radiators. All around a year old. Temporary programmed temperature override to temporarily override the programmed temperature till the next switch point. I went through the installation as per the step by step instructions and i must say it was pretty easy, even for a novice like me.It can be used as part of a system in conjunction with combiboilers, oil-burners and gas fired boilers, circulation pumps, thermal actuators, zone valves and electric heat systems ( <5A). The CMT707 Programmable room thermostat is a very easy to use and allows control of the time and temperature within your building.The CM707 has a large,clear LCD dispaly and is compatible with most combi boilers and heating systems* Two wire volt free connections are ideal for use with Combi boilers. Honeywell CM707 Programmable Thermostat (7 Day) Features: The Honeywell CM707 is a programmable thermostat that allows users to easily control the heating and cooling of their homes. It features a sleek and modern design that blends well with any decor. The thermostat is specifically designed to provide comfort and energy efficiency, allowing users to set different temperatures for different times of the day. The unit will display the first parameter of installer parameter group category 1 (from n.1 to n.19). When enabled the Pump Exercise will switch the relay on for 1 minute at 12:00 if the relay has not been switched on since 12:00 the previous day.

Honeywell CM707 je programovateľný izbový termostat navrhnutý pre presnú a kvalitnú reguláciu vykurovacieho systému a zefektívnenie celkového vykurovania. Zabezpečuje tepelnú pohodu počas vašej prítomnosti i v dobe keď ste mimo domu a tým aj úsporu energie.The normal lower temperature limit of 5 oC can be increased up to 21 oC to protect the inhabitants from cold. Useful if the inhabitants include the elderly, children or disabled. Designed with reliability in mind, the CM707 is built to withstand daily use and ensures consistent and accurate temperature control. It is compatible with a wide range of heating systems, including combi boilers, and can be wired or used wirelessly with an RF module.

One of the key features of the Honeywell CM707 is its advanced scheduling capabilities. Users can set up to six different temperature settings per day, ensuring optimal comfort and energy savings. This thermostat also has a vacation mode, which allows users to set an energy-saving temperature while they are away. I tried to down load a Manual for a Honeywell CM707 thermostat and gave you my card details. I did not get an approval Installer Set-Up Mode allows extra functions to be set at the discretion of the installer to match the consumers applications and needs: In terms of compatibility, the Honeywell CM707 is compatible with most heating and cooling systems, including gas, oil, and electric systems. It also supports both 24-volt and millivolt systems.

On the boiler it is set to the Hot Water and Radiator mode, which it has always been. I have removed the batteries from both CM707's but it still carries on heating. It is like it is ignoring the downstairs Thermostat and just constantly heating the radiators. Can be adjusted up to 3 oC (default is 1.5 oC) to provide better temperature control (less overshoot). I have an issue with my heating and wondered if anyone could help/know of anything to try before i call someone out. I have just bought a tado smart thermostat + starter kit + Valve radiators. while going through installation videos i have got confused as all of the videos are showing either having 3/4 wires or N L L A B C type of wiring. My home wiring seems to be simpler, on further reading i understood that this one is a heating only furnace (excuse me if i am getting the terminology wrong).