Metal Prep - gently etches metal, creating an ideal anchor pattern for coatings such as POR-15 Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. POR-15 Metal Prep is not caustic, corrosive, toxic or flammable. The POR15 Rust Preventive Paint can be applied over rusty or seasoned metal surfaces to stop rust from reoccurring by preventing any exposure to moisture. For better, longer lasting results we recommend the surface is firstly cleaned with POR15 cleaner degreaser then treated with POR15 metal prep. Founded in 1923 as Wood Finishing Products Co, the company produced shellac coatings and related products under the Absolute brand name, catering to a large market for shellac that existed before the introduction of alkyd paints. The company focused on using shellac, lacquer, varnishes, and polyurethanes for floor finishes for almost 95 years, and its founders were dedicated to producing the best products possible. The company later changed its name to Absolute Coatings to reflect the growth in its product line. POR-15 Rust Preventive Coating is a permanent rust repair great for auto frame and chassis restoration, protecting valuable equipment against rust and corrosion. Use POR-15 Cleaner Degreaser and POR-15 Metal Prep to properly get your surface ready for the POR-15 Rust Preventive Coating. You'll be amazed at the toughness!

It’s so tough it actually adds strength to weakened metal. And it won’t absorb moisture and swell like conventional body fillers. Try it yourself, it’s incredible!Clean with Cleaner Degreaser as above, then sand with 300 grit sandpaper and apply one light to medium coat of POR-15 Self-Etching Primer. To prevent the corrosion process, we thoroughly recommend applying the POR-15 Top Coat over POR-15 Rust Preventive AUTOMOTIVE: suspension – chassis – doors – trunk areas – engine & fuel tanks – rusty frames – floor pans – corroded battery tray. The company attributes much of its success to the personal relationships it has built with its customers over the years, valuing their trust and loyalty. Private label business has also been important to POR Products, which has earned the trust of some of the largest paint companies in the country. Fuel Tank Sealer - The POR15 Fuel Tank Sealer is resistant to fuels, alcohols and fuel additives. Fuel tank sealer is poured into the tank and then the tank rotated in all directions to ensure the whole inside of the tank is coated. It chemically bonds to the tank forming a strong permanent seal which resists further corrosion. It is recommended that the tank is prepared using POR15 cleaner degreaser and then POR15 metal prep to ensure the tank is clean and rust free before using the tank sealer.

Spray or Brush Application: POR-15 Topcoat will need thinning using POR15 Solvent for all spray and brush applications between 10-20%. Use 25-35 lbs.(172-240Kpa) pressure for normal semi-gloss.POR-15 Rust Preventive Coating is an effective anti-corrosive and rust preventive coating that offers superior chemical resistance due to its dense, cross-linked molecular composition and non-porous attributes. Do not paint directly out of can. Like all POR-15 coatings, this should always be stirred, never shaken. Whilst any paint will provide some degree of protection from rust for a while, no other is as permanent as POR-15. When others have chipped, scratched, flaked, and peeled, POR-15 Rust Preventative Paint will still be preventing rust. POR-15 Metal Prep provides the best adhesion for on any metal surface, including aluminum and shiny polished metal surfaces. The simple process of this pre-paint cleaner for metal gently etches metal, creating an ideal anchor pattern for coatings such as POR-15 Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This metal etching solution will allow better adhesion of POR-15 Rust Preventive Coating or any other coating. This metal-etching rust neutralizer is not caustic, corrosive, toxic or flammable. Stir contents well, then dispense a portion into a separate container and seal can at once, keeping lid and grooves clean to avoid permanently sealing can shut.

This includes POR15 Rust Preventive Paint (113ml). Tin covers up to 12sq feet. Perfect if you don’t finish all in once. POR-15 Rust Preventive Coating is a high-performance coating designed to paint directly on prepped rusted or seasoned metal surfaces to stop rust permanently. POR-15 Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust. Metal Prep to remove rust, etch the interior surface, and leave a zinc phosphate coating to prevent further rustingPOR-15® high-performance coatings revolutionised rust protection. POR-15 products form an impenetrable barrier that protects a variety of surfaces from water, chemicals, salt, corrosive contaminants, and everyday wear and tear. POR-15® products are designed to work separately or as a complete system. In 2016, the wood flooring side of the business was sold, along with the Absolute Coatings brand name. The company was renamed Paint Over Rust Products, LLC (P.O.R. Products) to reflect its focus on specialty metal coatings for heavy industrial equipment, agricultural machines, and automotive restorations. The company continues to adapt to changing markets and recently launched its Auto Refinish division, focusing on clear coats and primers for the automotive refinish market.