Over the years I have been asked to test dozens of similar devices using magnets and they all falter in the same way. Some inventors say that they take the energy from the aether but a normal magnetic motor has no means to do it. In the future we may be able to find a way to utilize the aether for power generation but not today. So to summarize: You use masses of power to magnetize the magnets…you then use means to demagnetize these magnets and that power is what is driving the motor. So, there’s a couple of angles to this. What you’re talking about is putting an inductor into a spinning magnetic field. Magnetism was and has been well known, for centuries, as a direct source of energy, independent of electrical generation or storage. Tesla did not see electricity as a requirement for creating motion or work, but as only one possible source of energy. A 17th century windmill creates work without electricity, and sunlight through a lens creates heat without electricity (unless one wants to create steam to turn a turbine or driveshaft and create electricity for storage in a battery.) To all of you who see this and become excited over it: crafting your beliefs based on what you wish could be true is folly. Educate yourself.

Why isn’t there already a “magnetic car” using two opposing permanent magnets shaped like a brake shoe, directly and silently turning a metallic turbine or driveshaft, without the need for an electrical generating or storage system? A set of mounting arms would simply move the magnets towards each other, and make the driveshaft spin faster. It would look like this at rest from above The wold has done a HUGE amount of research on magnetics and electromechanical energy conversion – it’s extremely well-understood technology. Efficiency of energy conversion can be quite high for particular types of motors. But it is, and always will be, the case that energy must be put in before it can be taken out. Having researched a little further, it would seem that the real problem here is the length of the Kadee uncoupler (this includes the electromagnetic type; I have both types here); using a much smaller and precise magnet may completely avoid the problem. Here is a topic I found: Zou, H., Liu, Z., Zhao, X., et al.: Characteristic analysis of wall-climbing robot magnet-wheel based on Halbach array [J]. Light Industry Machinery (2019) Pan, B., Zhang, J., Wei, K., et al.: The optimization of a novel permanent-magnetic wheel attraction unit for wall-climbing robot based on Halbach array [J]. Journal of Zhejiang University of Technology (2015)

Add Product Review

Secondly, well… they DO stop spinning, you just can’t perceive it. The Earth has a rotational kinetic energy of 2.138×10

Haihong, WU., Zhou, Z.: Test of all position automatic welding technology for super large diameter steel pipe with one-sided welding and double face forming [J]. Guangdong Water Resources and Hydropower (2019)

The center core magnet will affect each roller level differently, & to balance the values you must use fractal spiral magnetization At each level of rollers. There are literally thousands of people out there in the world who have invented magnet devices which can rotate on their own power and thereby drive a generator without any help from external power sources. There are also people exploring plasma coil schemes which “induct” extra electrical current from the limitless potential we are swimming in. The use of these devices will be commonplace in 40 years — the need for a power “grid” and paying for energy will be obsolete.

Wang, X., Peng, G., Wang, G.: The design of Halbach array permanent magnet for in-wheel motor[C]// electrical machines and systems (ICEMS), 2013 International Conference on. IEEE (2013)just make sure the attraction level for each roller to core are equal in every level after utilizing fractal magnetization.