It also includes a chamfered intake and fluid dynamic bearings, which provides you with silent operation and powerful cooling. Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling.

With the CAM software, NZXT even gives the user the ability to customize the pump and fan performance itself. Customize the look of any CAM-powered Kraken pump with the most advanced RGB lighting effects and our signature infinity mirror.And anyway that's not about the fans being amazingly better that's just how fans work you simply don't get an amazing performance gain from even double the RPM. Still, hardly anyone will let their fans run >70% for daily usage, every fan out there will be loud.

There are sixteen long fan screws at the back, while in the front there are eight short screws to secure the radiator, and sixteen washers to use as well. the thing is the hoses and rad are cool to touch not much to differentiate, the liquid temp is at 31c even tho the cpu is 90c.X52's best result (with shouty fans at 2100RPM) can be achieved by the X62 with a low, quiet 1050RPM fan speed. Features are listed at the bottom, while the right side is used to display one of the windows in the CAM software, to give you an idea of what to expect. They should all feel about same temp with flow out of pump to radiator being a few degrees warmer than flow from radiator to pump. When i had the pump on 100% in the bios (asus,ryzen 3600) it ran in silent mode (2000 rpm) so i installed nzxt cam after the kraken x firmware software update there was.