There is (still) much to be said for the ‘standard’ UHD (1080p) dual-channel systems like the K3 with its center-hub layout providing a system easy to install, easy to configure, ultra-reliable and, more economically priced to boot. A recommended change –in working out median cable runs from both the module and the individual components, increasing the module’s flying lead lengths by 10 to 15cm or alternatively, lengths of the individual component cables, would provide extensibility and flexibility (literally) to better route/secure/hide the connections cables. The K3 features dual-core processing for substantial processing enhancements, a higher performance GPS receiver usable with multiple GNSS systems, an intelligent DC converter with voltage monitoring, form factor upgrades and, new remote control and external microphone components first seen on the K5 system.

INNOVV K5 Dash Ca | innovv Introducing INNOVV K5 Dash Ca | innovv

To access the storage card, or micro-USB port, access the cover plate and remove it using the (supplied) small Phillips screwdriver (the screws will not fall out). Push the storage media in slightly to activate the spring-loaded release and remove the card. Protected (User Intervention) – if the user pushes the Function Button on the remote control during normal use of the K5 system, the ongoing loop video is saved to the Protected Folder and a small Green stylized ‘P’ icon appears on the live view screen indicating that this mode is active and the Camera LED goes into a double-flash mode.Accident – during normal use of the K5 system and if a median setting for the G-Sensor sliding scale has been done, a significant fall or impact as might occur during an accident of some sort activates this mode with ongoing loop video saved to the Accident Folder. Media in this folder is protected and identifiable by the letter ‘G’ added to the ‘F’ and ‘R’ identifier in the file name. Media in this folder is protected and cannot be overwritten by any Continuous loop recording. Once update is successful the blue light will be flashing on a regular basis appx once a second. If for any reason the update was not successful, please repeat the update. Protected (User Intervention) – if the user pushes the Function Button on the remote control during normal use of the K3 system, the ongoing loop video (loop-time contingent) is saved to the Protected Folder and a small Green ‘P’ icon appears on the live view screen to show that this mode is active and, the Camera LED on the remote control goes into a double-flash mode. Bench Testing – didn’t bring any surprises, but it did generate a number of positive observations regarding how well the system goes together and works together as a system; and the WiFi local network connectivity works first time, all the time. With this connection made, the INNOVV App is launched for the first look at everything via the user interface. Installation Assessment & First Hosting

INNOVV K5 Dashcam | INNOVV

The camera lenses provide a 120-degree field of view with a 6-G +1IR structure and an F1.8 aperture. System resolution settings for the front/rear camera pair are: 1080P @ 30FPS or 720p at 60fps. Time-Lapse Video settings – if continuous recordings are desired, then this setting is set to OFF, otherwise frame intervals of 100/200/300/500ms or 1s are provided for I am so glad that I am not the only one frustrated by this unit firstly where on the installation sheet does it say that this unit can only be fitted in one plane I fitted it expected to turn the output by 90 degrees only to find its impossible Recording (Protected) Mode –in not (yet) having done a detailed time analysis between recorded media saved to the separate folders, an outstanding question regarding Protected Mode concerns whether only the current loop video is saved off or if both the last and current loops are saved off or if some overlap or bridging time is added. Screen Preview layout – selectable with either F, R, F&R or R&F layouts, with the secondary view residing in the upper left cornersave the current video by pressing the button once which tags the video as protected and subsequently saves it to the Protected Folder on the storage media, Resolution settings for the front and rear cameras are 1080P at 30FPS or 720P at 60FPS (there are no individual settings for the front and rear cameras). The video compression mode is H.264 and video media can be saved as either MP4 or TS files. To fully experience your driving adventures, INNOVV recommends Dashcam Viewer desktop software. Dashcam Viewer decodes and visualizes the GPS data embedded within the video itself. Play your videos and watch as your vehicle’s position, speed, distance, and other data animate on graphs, widgets, and maps. Tag points of interest, export clips, combine multiple videos into one, save GPS data, and more.