Common Class I items include toasters, kettles, microwaves and fridges. What is a ‘Class II’ electrical item?

One of the first advantages your team will notice is access to unlimited PAT testing certificates. Digital certificates ensure there’s one less thing to store in your vans, and fewer physical records to maintain in the office. This guide outlines the legal requirements and guidance relating to PAT testing and electrical safety including: Health and Safety at Work Act 1974 (HSW 1974), Management of Health and Safety at Work Regulations 1999, Electricity at Work Regulations 1989, Provision and Use of Work Equipment Regulations 1998, Housing Act 2004 (England and Wales), Housing (Scotland) Act 2006. Who has responsibility? The majority of these fires are completely preventable, and ensuring electrical equipment is maintained and is safe to use is a key way for businesses to prevent electrical fires. Not only can fires cause loss of life or serious injury, but they can also destroy equipment and premises. Advanced PAT testing kits are suitable for users with a high level of technical knowledge and expertise. These advanced systems are particularly well suited to facilities management, as they allow for the recording of the location and test status of equipment and appliances. Some of these systems can also transfer the test results to computers for digital interpretation. Test records can be maintained with PAT software. PAT Testing Training Courses - More information about our training courses, and what to expect if you attend one.There is no formal legislation specifying the need for PAT testing. However, it is a legal requirement to ensure that electrical equipment is safe and fit for purpose. The expected regularity of PAT testing will depend on the results of workplace risk assessment procedures. When determining the need for PAT testing, the level of risk should also be considered. With over 160 qualified electrical engineers available, our experienced team conduct these vital safety tests during your operational hours, without disrupting your customers or staff. We are proud to also be fully accredited by NICEIC, BIFM and CHAS, amongst others. Do I need to PAT test employees’ personal equipment?

Technically, all organizations that use electrical appliances in their place of work are required to undergo PAT testing, from private companies to health clubs and universities. Businesses are labelled as high, medium, or low risk based on three factors, the risk level of the environment, the type of equipment used, and who uses them. We have update this guide to reflect the changes but you may wish to watch our full webinar to find out what has changed from the 4th Edition to the 5th Edition. Public use equipment – Stationary and IT equipment such as computers should be tested every 12 months. Moveable, portable and handheld equipment falling into class 2 should be tested every 12 months. Moveable, portable and handheld equipment falling into class 1 should be tested every 6 monthsProducing one document for a new domestic installation is time-consuming enough, but having to fill out potentially dozens for a single job can be an administrative nightmare. It’s not simply a matter of photocopying the document either, as each appliance will have different specifications and features. Who uses the item? A trained member of staff is a lower risk than an untrained member of the public Instruments - You or your employees must have access to sufficient instruments to carry out tests relevant to your scope of work as well as in date calibration certificates for this equipment where applicable.