Connect the serial adapter to the rollover cable. Connect the RJ-45 end of the rollover to the FortiGate’s 'Console' port.

Single Radio (2.4GHz/5GHz), 802.11 a/b/g/n/ac-W2 Dual WiFi Radio (5 GHz, 2.4 GHz) 802.11a/b/g/n/ac/ax + 1 Scanning Radio Advanced Threat Protection (IPS, Advanced Malware Protection Service, Application Control, and FortiCare Premium) You can manually enable bypass mode if the FortiGate 80F Bypass model is operating in transparent mode. You can also manually enable bypass mode for a VDOM if WAN1 and 1 are both connected to the same VDOM operating in transparent mode. On the FortiGate 80F Bypass model, the WAN1 and 1 interfaces form a copper bypass pair. The SFP1 interface is not part of the bypass pair. On the GUI and CLI the 1 interface is named internal1. Services on all other products and for other use cases, please refer to the relevant product data sheet. FortiGate Hardware and VMInterfaces SFP1 and WAN1 and SFP2 and WAN2 are shared SFP or Ethernet interfaces. Only one of each of these interface pairs can be connected to a network. This allows you to, for example, connect SFP1 to an SFP switch and WAN2 to 10/100/1000BASE-T Copper switch. x GE RJ45 Ports, 2 x GE RJ45 WAN Ports, dual WiFi radio, with embedded DSL and 3G/4G/LTE modules, 128GB SSD onboard storage.

This article explains how to factory reset the configuration using the external reset button on low-end FortiGate models This button is useful to be pressed when the FortiGate is at frozen status and not responding to management or pass through traffic.This graphic was published by Gartner, Inc. as part of a larger research document and should be evaluated in the context of the entire document. The Gartner document is available upon request from Fortinet. If there is no Ports section listed ensure the proper drivers are installed for the adapter to function. Threat Protection performance is measured with Firewall, IPS, Application Control, URL filtering, and Malware Protection with sandboxing enabled. Select 'All session output', select browse and save the log file to a location that can be found later. Consider adding a name and date to it.

A built-in dual-band, dual-stream access point is integrated on the FortiWiFi 80F-2R series which provides the industry’s latest high-speed WiFi-6 (802.11ax) wireless access. The FortiGate FortiWiFi 80F series provides an application-centric, scalable, and secure SDWAN solution in a compact, fanless, desktop form factor for enterprise branch offices and midsized businesses with integrated WiFi-6 (802.11ax). Protects against cyber threats with systemon-a-chip acceleration and industry-leading secure SD-WAN in a simple, affordable, and easy to IPS (Enterprise Mix), Application Control, NGFW and Threat Protection are measured with Logging enabled. You can use the command diagnose npu np6xlite port-list to display the FortiGate 80F or 81F NP6XLite configuration. diagnose npu np6xlite port-listHardware Unit, 24x7 Comprehensive Support, Advanced Hardware Replacement (NBD), Firmware and General Upgrades, UTP Services Bundle (IPS, AV, Botnet IP/Domain, Mobile Malware, FortiGate Cloud Sandbox including Virus Outbreak and Content Disarm & Reconstruct, Application Control, Web & Video Filtering and Antispam Service) plus term of contract The FortiGate 80F and 81F includes the SOC4 and uses the SOC4 CPU, NP6XLite processor, and CP9XLite processor. The SFP1, SFP2, WAN1, and WAN2 data interfaces connect directly to the NP6XLite processor. The 1-6, A, and B data interfaces connect to the NP6XLite processor through an integrated switch fabric. Eight 10/100/1000BASE-T Copper (1-6, A, and B) connected to the NP6XLite processor through the integrated switch fabric. A and B are FortiLink interfaces.