Easy Setup and Pairing: Connect the neoHub Gen 2 to your home router using an Ethernet cable and a free port. It is a plug-and-play device, and pairing with neoStat, neoAir, and neoPlug is incredibly simple. You can pair up to 32 Neo devices with the hub. During this period, please be assured your heating will continue to work normally. All of your neoStat’s have their own programmed settings, so whilst you cannot make adjustments via the app, your heating will continue to work and you can make changes or increase the temperature on each of your neoStat wall thermostats. Recipes can be used to run a series of actions, such as boost the Hot Water and turn up the Heating for a number of rooms. The neoHub Gen 2 connects to your home router by an ethernet cable, so one free port is required. The neoHub Gen 2 is very much plug and play and pairing neoStat’s, neoAir & neoPlug to the neoHub Gen 2 couldn’t be easier. After you have paired all of your Neo devices (up to 32 are supported) you will have In Home and Remote access of your heating, hot water and appliances. The neoHub Gen 2 handles all of the network communication between the neoStat & neoAir room thermostats and the smart plug “neoPlug” enabling you to control your multi zone heating, hot water and appliances from anywhere.

Heatmiser Apple HomeKit Thermostat | Heatmiser

Smart Profiles - Allow you to program time and temperature settings and then apply them to a number of zones. Any subsequent change to the profile will be automatically applied to those zones using the profile. The neoHub published API makes it easy for third party integration companies to integrate Neo with leading home automation systems. Totally unstable connection from thermostats to receiver. Even with the boost in place. Stay away from this product. It will continuously disconnect and go offline. Comfort Levels are the time and temperature settings used by the neoStat when a Profile from the neoHub has not been applied. HomeKit Support: The neoHub Gen 2 offers HomeKit support for all connected Neo devices, allowing seamless integration with Apple's smart home ecosystem.Once enabled in the iOS/Android neoApp, the neoApp will show additional history data. This includes the set temperature, room temperature and whether the room was preheating or heating. This is available for each zone for the last 13 months.

Smart Plug neoPlug - Control your Appliances from Anywhere

Flexible Programming:Your neoStat can be setup to work in non programmable, weekday/weekend, 7 day or 24 hour programming mode. Our system uses a Zigbee Mesh which runs on 2.4GHz which is like broadband Wi-Fi. It has been known that if routers have a ‘Smart’ capability then they can change channel themselves without any intervention. If this happens to be the channel that the neoHub is on, it can clash and cause interference. Neo offers 4 or 6 level programming per day – this is the number of different temperature settings you can program. Neo can pre-heat your home and will automatically learn how long your home takes to heat up. You can use this setting to limit the pre-heat time, we suggest 3 hours for most homes. This is set on a per zone basis.Whilst you won’t be able to use the app, you can make adjustments to your heating by operating the neoStat directly on the wall. If you want to maintain a set temperature for several hours in a certain number of rooms, Neo allows you to do just that. But you will need to install multiple neoStats if you want to be able to control the temperature in different zones independently. The Neo Heatmiser neoStat is a popular smart thermostat designed to help consumers take control of the heating and hot water remotely from anywhere. If you want to save energy and reduce your heating bills, Neo by Heatmiser could be the solution.

Heatmiser NeoHub Gen2 The Hub is Compatible with All Neo

The Heatmiser neoHub offers unrivalled system type support, from electric & water underfloor heating, conventional radiator systems as well as hot water and towel rails. Not so good on this one, easy to set up and incorporate with neo hub. However this plug would not cut the 240 supply to the outlet, so any appliance plugged in would not switch off! Waiting for my replacement as I type. Heatmiser neoHub has been designed to offer multi zone smart control for most heating systems, including radiators, electric and water underfloor heating. Cloud Server Connection: The neoHub Gen 2 effortlessly connects to the Heatmiser Cloud Servers, eliminating the need for complex technical setup. With the Heatmiser Neo you can control multiple zones (rooms) in your house and adjust the temperature of your heating manually or remotely via the neoApp which is available on iOS, Android andThe neoHub Gen 2 is the central hub and communication gateway for the Heatmiser Neo System, connecting the neoStat, neoAir, and neoPlug devices. With the neoHub Gen 2, you can control your heating and hot water system from your smartphone, making it an essential component of your setup. neoHub is the gateway to the Neo System, providing remote control of all neoStats and neoPlugs from your iOS, Android and Windows 10 device.

Heatmiser Neo System Overview | Heatmiser

Also, the where the neoHub is placed can also cause issues. For example, I would avoid having the neoHub directly above or below your router as that is where the router’s signal is strongest. A recipe is a series of actions, such as set the Turn off the Hot water, Set the Living Room to 15C Try and keep the neoHub at least 20cm away from the location of the router and to the side of the router. Remember if the neoHub is behind your router, the signal will try and get through to the router which could cause problems. Ensure that all users use a unique login and don’t enable Geo on devices you will leave in the home.

Your neoStat should show the radio signal on screen and the app should indicate the zone has been added successfully. Geo-Location FacilityYou decide what happens when you leave and return home (Configure on a room level) Disconnect any Wi-Fi extenders and wait for around 5 minutes to see if the thermostats return to being online again. Your neoHub will be marked offline in the neoApp when it cannot connect to the Heatmiser Cloud Server. The neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a free account via the Nu-Heat app and then take control of your heating, hot water and appliances from anywhere.