The Plugable USBC-NVME enclosure we are looking at today is also based on the same bridge chip. It can accommodate a M.2 2230 / 2242 / 2260 / 2280 NVMe SSD. The aluminum enclosure comes with two 25cm cables - a Type-C to Type-C, and a Type-C to Type-A . Both are rated for 10 Gbps operation. Plugable also supplies three thermal pads, and rubber pegs (one for each supported M.2 SSD size). With its USB-C connection, the enclosure is limited to a theoretical maximum speed of 10Gb/s, and in testing it with one of my 128GB SK Hynix drives, I was seeing real-world write speeds of 850MB/s and read speeds of about 900MB/s. Using a different SSD, you could get slightly faster speeds with the enclosure, but that connection means you won’t see the speeds possible on some Thunderbolt-connected enclosures. An array of SMART features

JEYI 2230 M.2 Enclosure, USB 3.2 Gen 2 10Gbps M.2 NVMe SSD

Storage bridges are an indispensable part of today's computing ecosystem. Internal ones may enable different I/O ports in a motherboard, while external ones are responsible for a variety of direct-attached storage units. These may range from low-performance flash drives with an USB interface to full-blown RAID towers interfacing over high-performance links such as Thunderbolt 3. While Thunderbolt 3 remains a premium Intel-only interface for now, USB 3.1 Gen 2 has emerged as a mass-market high-performance alternative. It is available across systems based on chipsets from multiple vendors. In this context, high-speed USB 3.1 Gen 2 storage bridges are interesting to analyze. Today, we look at Plugable's USBC-NVME NVMe SSD enclosure that bridges a PCIe NVMe device (M.2 2280 or smaller) to a USB 3.1 Gen 2 Type-C interface. Introduction Use the PowerShell command Optimize-Volume -DriveLetter H -ReTrim -Verbose (assuming that the drive connected to the storage bridge is mounted with the drive letter H)ganeshts - Thursday, February 14, 2019 - link If you want the device to be bus-powered, it is unlikely you are going to get multiple NVMe SSDs in a USB 3.1 Gen 2 enclosure. The test starts off with the Photos folder in a RAM drive in the testbed. robocopy is used with default arguments to mirror it onto the storage drive under test. The content on the RAM drive is then deleted. robocopy is again used to transfer the content, but, from the storage drive under test to the RAM drive. The first segment gives the write speed, while the second one gives the read speed for the storage device. The segments end with the purge of the contents from the storage device. This process is repeated thrice and the average of all the runs is recorded as the performance number. The same procedure is adopted for the Videos and the BR folders. Readers interested in looking at all the graphs in one shot can choose the 'Expand All' option in the dropdown menu. Based on the results from the CrystalDiskMark tests, we expect the ASM2142 to comfortably win all the benchmarks, but, the numbers below indicate that the Cannon Point-LP PCH and the ASM2142 are actually quite similar in real-world performance (coming out on top in 3 benchmarks each). The numbers also serve to confirm that the MyDigitalSSD M2X and the Plugable USBC-NVME perform similarly when the Alpine Ridge-enabled Type C port is used.

Enclosure for - Scan Xclio Super Mini M.2 NVMe SSD External Enclosure for - Scan

ASMedia ASM2142 enabling the USB 3.1 Gen 2 Type-C port in the front panel of Intel NUC8i7HVK ( Hades Canyon NUC) Thanks for asking! The Samsung Data Migration software will not recognize a Samsung SSD in the USBC-NVME enclosure as a Target Disk. While the Samsung Magician does recognize the NVMe SSD in the USBC-NVME enclosure’s model number, Serial number, and firmware in the System Information, limitations in the Samsung Data Migration software prevent cloning to the NVMe SSD in the enclosure. Some of the early USB 3.1 Gen 2 ports were enabled by the third approach in the above list. For example, the ASMedia 1142 bridges 2x PCIe 2.0 or 1x PCIe 3.0 lanes to two USB 3.1 Gen 2 ports. Intel's own Alpine Ridge Thunderbolt 3 controller bridges 4x PCIe 3.0 lanes to a Type-C port that can act either as a Thunderbolt 3 Type-C, or, a regular USB 3.1 Gen 2 Type-C host (depending on the downstream peripheral).External bridge chip interfacing between one of the direct interfaces above or other available high-speed I/O lanes and the relevant I/O port In this review, we are focused on the USB 3.1 Gen 2 ports available in contemporary computing systems. The 10Gbps Type-C Enclosure for M.2 2230 NVMe SSD JMS583 USB3.1 Gen2 features an JMS583 controller to enable fast transmission speeds of up to 1GB/s in USB 3.1 Gen 2 mode. With its 52mm x 28mm size and 24 gram weight, this M.2 2230 SSD Enclosure is a small yet versatile choice for various personal projects. The enclosure features an ultra-durable and rugged aluminum alloy CNC case for exceptional durability even in tough environments. Plus, it comes with free USB 3.1 10Gbps C to C cable and A to C cable at no additional cost, making it even more convenient to connect on the go! SPECIFICATION

10Gbps Type-C Enclosure for M.2 2230 NVMe SSD JMS583 USB3.1

In the rest of this review, we compare the Plugable USBC-NVME with a host of other storage bridges (including the TEKQ Rapide Thunderbolt 3 enclosure). Note that only the MyDigitalSSD M2X belongs to the same specific category as the Plugable USBC-NVME. The table below presents the detailed specifications and miscellaneous aspects of the units and how they compare. While it may not offer the highest performance or absolute best value for money, it’s earned its place in my everyday carry, thanks to its minuscule size and great looks.

BR: 10.7 GB Blu-ray folder structure of the IDT Benchmark Blu-ray (the same that we use in our robocopy tests for NAS systems) When you start accessing the drive, a new screen automatically pops up to show you the read/write speed, data read/written this power session, and the total amount of data read/written over the life of the drive. Usually, PC Mark 8 reports time to complete the trace, but the detailed log report has the read and write bandwidth figures which we present in our performance tables. Note that the bandwidth number reported in the results don't involve idle time compression. Results might appear low, but that is part of the workload characteristic. Note that the same CPU is being used for all configurations. Therefore, comparing the numbers for each trace should be possible across different DAS units. Readers interested in looking at all the graphs in one shot can choose the 'Expand All' option in the dropdown menu. The M.2 2230 has never been a mainstream form factor. However, its compact size has made it a popular choice for embedded and laptop applications where portability is essential. We have been searching for a compact and high-speed storage solution, and we believe this product is the best option available on the market.

Enclosure, Tool-Free NVMe Enclosure UGREEN M.2 NVMe SSD Enclosure, Tool-Free NVMe Enclosure

Any difference in power consumption for the same access trace between two different units is down to the storage bridge itself (since the drive used is the same in all cases). Peak power consumption for the USBC-NVME with the JHL6540 and the ASM2142 was around 4.8W (same as the MyDigitalSSD M2X). The USBC-NVME idled at around 1.5W on both of our test systems, compared to the 1.2W number for the M2X (albeit, on a different testbed). We can't reliably conclude whether the difference in the host system (our custom Skylake testbed against the Hades Canyon NUC) is responsible for the lower idle power of the M2X, as it is also possible for the bridge firmware to be slightly different between the M2X and the USBC-NVME. Miscellaneous Aspects and Concluding Remarks I am sorry this will not work with the Samsung cloning software, please let me know if you have any additional questions. The next screen offers graphs of the drive’s temperature and input voltage, while the final screen allows you to upgrade the enclosure’s firmware. 9to5Mac’s Take The above numbers also reflect the similar real-world performance for the ASM2142 and CNP-LP PCH ports. Thermal Aspects and Power Consumption Intel JHL6540 (Alpine Ridge) enabling one of the Thunderbolt 3 Type-C ports in the rear I/O panel of Intel NUC8i7HVK ( Hades Canyon NUC)

Plugging in the enclosure reveals what makes it stand out – its 1.3-inch screen. When in standby, the home screen displays whether that power loss protection capacitor is charged, the SSD model currently installed, the remaining life of the SSD, and the amount of data that has been read from or written to the drive since it was powered on. Moving on to the real-world benchmarks, we first look at the results from our custom robocopy test. In this test, we transfer three folders with the following characteristics. We chose three different USB 3.1 Gen 2 hosts on two different machines to evaluate the Plugable USBC-NVME enclosure: