Whilst we apologise for any inconvenience caused, unfortunately, there is little we can do to prevent these situations. For example, they mention it's a top quality bit of kit, it'll last, and is a good budget torque wrench.

When you receive your bike, all you'll need to do is unpack it, attach the pedals, turn the handlebars and ride. PayPal Credit is a trading name of PayPal UK Ltd Registered Office: Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH.He’s since been indoctrinated into gravel riding and more recently has taken to the dark art of mountain biking. A less prominent type of torque wrench – but one that’s growing in popularity – is a portable bit-style ratchet with a torque feature. A beam-style wrench can be affordable, less prone to damage and easy to calibrate — simply check the needle is at zero before use and if it's not, bend the needle.

As preset options can often be quite stubby in design, if you are running an integrated seat clamp or wedge system, which often require a low-profile head, you’ll want to check there's enough clearance for the tool to fit. The wrench has an internal scale reading in intervals of 2 nm and this is set via an adjustment knob at the end of trhe handle. This means the cost is deducted from your salary as a non-cash benefit, so you save on tax and national insurance. i) The scale used for setting the torque value inside the wrench is positioned some distance below the small window in the handle that carries the red setting line. Performance Cycling Limited trading as Tredz is authorised and regulated by the Financial Conduct Authority.Cycle to Work is a salary sacrifice scheme, where you can save up to 42% off a new Bike and Safety equipment. uses a 3/8in drive rather than the smaller ¼in head, which means it isn’t as easy to wield in smaller spaces. As frame materials have evolved, tolerances have grown ever finer, and this is particularly true of carbon fibre frames and components. Please include a covering letter describing the fault and if you would like the item replacing or refunding. This is why bicycle-specific torque wrenches exist, though you could use a more general torque wrench for bolts that require a higher torque, such as the cassette, disc rotor lockrings and crank bolts.

Under the Consumer Rights Act you have a legal right to reject goods that are of unsatisfactory quality, unfit for purpose or not as described, and get a full refund - as long as you do this quickly. Winstanleys Limited acts as a broker and offers finance from a restricted range of finance providers. The M-Part Torque Wrench is a quality tool with all the necessary attachments to correctly tighten the nuts and bolts on your bicycle. It comes with six hex and three Torx bits, its 22cm length is a good size for making precise adjustments and it works both clockwise and anti-clockwise. Warren Rossiter is BikeRadar and Cycling Plus magazine’s senior technical editor for road and gravel.Please note that if an item has been damaged through rider neglect, misuse or wear and tear , then it will not be covered by manufacturer’s warranty.

Further to this I then did some very rough calibration tests by loading the spanner at a known distance from the centre of the wrench square drive with weights of a known value (1 Kg bags of sugar). CDI, part of the Snap-On corporation, is a torque specialist, and this is the cheapest tool it offers.The free service is put in place to make sure the bike you have purchased is running correctly and to adjust out any cable stretch that happens to any new bike. M Part's Cycling Torque Wrench is a high quality, accurate and precise product, making it a must have for all cycling enthusiasts of any level or discipline.