The SC4 is a TRS to TRRS adaptor, designed to allow microphones with a 3.5mm TRS output to connect to deviceswith a TRRS input. This is ideal if you want to connect a RØDE VideoMic, lavalier or Wireless GO to a computer, smartphone or tablet. SC5 – 3.5mm TRS to TRS Cable for Wireless GO II (Not Available Separately)

USB outputs are usually found on microphones intended for use with computers and mobile devices, like the RØDE NT-USB and NT-USB Mini, VideoMic Me range or Wireless GO II. As you can see with the differentconnections listed above, it’s important to pay attention to what type of cable is required for your microphone and recording device. There’s nothing more frustrating than trying to plug in your mic and realising your cable is the wrong kind!

Rode SC4

Say goodbye to bad sound quality! This TRS to TRRS adapter significantly improves your audio quality by allowing you to connect an external battery-powered microphone to your smartphone, tablet or computer. First, it’s important to know a little bit about the different types of cable connections you’ll come across in this list, what they’re used for, and what type of devices they’re commonly found on before diving in any further.

If you want to convert TRS to TRRS without losing audio quality then you should follow the instructions given above. Ok, let’s dive into our wide range of cables for all your connection needs. SC1 – TRRS Extension Cable (6m) Allows you to connect your standard TRS (3-pole) 3.5mm microphone connector to your TRRS (4-pole) smartphone The SC11 is a TRS splitter cable for connecting two mono outputs to a single stereo input. It is particularly suitable for connecting two microphones to a camera, for example, dual Wireless GO receivers, or a Wireless GO and a VideoMic. SC15 – Lightning Accessory Cable (USB-C to Lightning)

The SC16 is a 300mm-long USB-C to USB-C cable designed to connect RØDE microphones with a USB-C output to USB-C compatible devices. SC17 – USB-C to USB-C Cable (1.5m) Most microphones have either a 3.5mm, USB or XLR audio output (or a combination of these)for connectingthemto different devices. TRS is widely used in music production. The most common use of TRS cable is to carry balanced mono audio signals. The SC19 is a 1.5m-long Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices. SC20 – USB-C to USB-A for Wireless GO II (Not Available Separately) In consumer electronics, they are used to carry a microphone signal along with the stereo audio signal.

I hope this article helped you in this. Let me know in the comments if you have any suggestions or queries. These TRS-to-TRRS connectors minimize signal loss and noise and you will get clear audio without losing audio quality.

If you’re a creator, there’s a good chance you use multiple microphones to record with multiple devices in a wide variety of scenarios. This may mean the cable that came with your microphone doesn’t quite do the job in every scenario you need it to – either it’s not the right length, or the connection type is wrong for your recording device. Thankfully, we offer a range of high-quality cables and adaptors to suit a wide variety of applications. The same goes for microphones. Video mics such as Rode VMPR VideoMic Pro have TRS connectors and most of the cameras have TRRS ports. TRS connectors are used with monitoring headphones, studio monitors, mixers, audio interfaces, and instruments. TRRS connectors are mainly used in consumer-grade electronics such as iPhones, iPad, and other mobile phones. The SC22 is a 300mm USB-C to USB-C cable which is included with the AI-Micro. Similar to the SC16, it is suitable for connecting RØDE microphones and devices with a USB-C output to USB-C compatible devices such as smartphones or tablets. VC1 – 3.5mm TRS Extension Cable (3m)

The SC17 is a 1.5m-long USB-C to USB-C cable designed to connect RØDE microphones with a USB-C output to USB-C compatible devices. The SC17 is also Hi-Speed certified, making it ideal for connecting the NT-USB Mini or RØDECaster Pro to devices with a USB-C input, such as computers and tablets. To help you decide which one is right for you, we’ve put together the ultimate RØDE cable and adaptor guide, so you can get recording in no time. The RØDE SC17 USB-C to USB-C cableconnectingthe RØDECaster Pro to aMacBook Pro. Understanding Different Cable ConnectionsLightning – Utilised exclusively by Apple products, Lightning is an 8-pin connector that carries a digital signal for power or data transfer. If you’ve owned an iPhone over the past 10 years, chances are you’ve come across this cable before to charge your device or connect it to a computer. The SC2 is a 3.5mm TRS to TRS patch cable used for connecting microphones or wireless receivers to cameras. The coiled cable means that the SC2 can easily extend from 170mm to up to 400mm.