A proven product design that works.The original and protected DYNELLO-design that characterise DYNELLO® strap winders provides excellent control of the strap. The winding-shaft and steering system are made of aluminium and stainless steel, which makes them unbreakable and allows them to support very heavy straps. We import direct from the factory and are the UK distributors. This is the original and Genuine product - Not a cheap copy! By using a cordless drill for strap winding, you have the advantage that the torque control on the drill can be adjusted to achieve the right ‘tightness’ of the wound strap. If the strap is very wet, you can try to squeeze out the worst of the moisture with a high torque setting. Note, however, that the more tightly the strap is rolled on the winding shaft, the more problematic removal can become. Lightweight and durable product.The entire tool weighs only 185g, which does not add significant weight when rolling up heavy straps. The construction is rigid and easily withstands impact and heavy use.

The winding shaft is also machined with cone design, which makes a huge difference when the wound lashing strap is removed. In one easy movement, the strap can be removed even when the strap is wound very tightly. The slot is 50mm deep and therefore designed for winding 50mm straps. However, it is also possible to wind up to 75mm wide straps. The base-plate on which the winding shaft and strap-steer are mounted forms the base structure, which ensures controlled winding of the strap. The base-plate is made of 3mm AISI 304 stainless steel, so it can withstand both drops and beatings. AISI 304, as you know, is a widely used type of stainless steel that performs well in all weather conditions.

Add to Wish List

It is therefore important to maintain the strap winder by lubricating it regularly with grease or viscous oil. The StrapWinder is the ultimate load strap accessory; it's as simple as a fishing reel, having only one moving part and virtually nothing to wear out or go wrong! Think of that - the StrapWinder will probably pay for itself on its first couple of days, saving the operator a potential 2 hours per week!

So if you have a drill lying around and want a simple and robust strap winder, the DYNELLO® Accu Winder is the right choice. The DYNELLO® Accu Winder is primarily designed for winding 50mm straps, but can also be used for slings and lifting straps. The speed of winding is also controlled with the cordless drill. We recommend a maximum winding speed of 400 rpm (!) Maintenance-free dry bearing technology.The strap winder has a special designed in-built dry bearing, which gives stability and super low friction. The polymer contains PFTE (Teflon™) also providing ultra-low friction between the rotating shaft and body making each winding smooth. This can often be set on the drill, where the lowest speed should always be selected. For a lashing strap of about 10m, this speed can be used to wind the strap in less than 10 seconds. Please read all our recommendations in the instruction manual supplied before using the strap winder.

Having tried various strap winders, this has to be the best one I’ve had, very sturdy and strong, when you wind 14 straps 4/5 times a day it’s got to last and this fits the bill

DYNELLO® Accu Winder is our simple strap winder that offers fast and easy strap rewinding. It builds on our best experience from our electric strap winder, but adapted for fitting in your own cordless drill.Badly stowed straps cost time and money, become knotted, then become liable to fray or snap under extreme tension. Not to mention the frustration after a hard day's driving! The strap-steer, which also consists of two pins in AISI 304 stainless steel, is welded to the base-plate with a distance/gap of 10mm between the pins. The strap-steer is extremely efficient to ensure a nice and uniform winding and also makes, in our opinion, the DYNELLO® Accu Winder the easiest strap winder to use for a cordless drill. The strap-steer is an essential feature that DYNELLO® has developed and makes a huge difference in the ease of use of our strap winders, unlike other models on the market. In one uncomplicated movement, the strap is inserted first into the strap-steer and then the winding shaft, and with a firm hand, the strap is ensured to stay in the strap-steer during winding. Therefore, during winding, one does not have to focus on controlling the strap as if one did not have a strap-steer. Corner Iron Hook: Our corner hook is constructed with no sharp corners to reduce abrasion to rope or cable, maintaining the lifespan of your ties. Web Winder: Easy to attach to vehicle rails, easy to remove with tapered forks, and easy to disassemble for storage, Ancra’s web winder winds 2-in., 3-in., and 4-in. winch straps. Built of all steel, the web winder will last for years down the road.