We would love for you to be able to prepare a smaller bottle volume with the Perfect Prep™ unit, but it cannot make up a bottle below 4oz because the volume of the feed needs to be large enough to easily split into two: Batch code of the unit (this is engraved on the base consists of 5 numbers and then the letters XO).

Press the filter volume reset button for 2 seconds to clear the memory. Discard dispensed water. Your machine is now ready to use. On average each Perfect Prep filter should last around 3 months, however this depends on the frequency of use and what size bottles you are preparing. The original Perfect Prep machine features a warning light which will indicate when the filter is due to be replaced and the Day & Night version will display a message on the screen. The Perfect Prep™ unit contains a probe that measures the temperature of the water in the tank which prevents the unit from dispensing if the water is above 27°C. This is a key safety feature to ensure that the final feed is not too hot for your baby. As with any other method of making up a feed for a baby, it’s essential that good hygiene practices are observed when using and maintaining your Perfect Prep™ machine.The ion exchange resin removes heavy metals in the water and reduces limescale. The activated carbon removes chlorines, pesticides, herbicides and pharmaceuticals Anti-Bacterial Filter: The Perfect Prep anti-bacterial filter is designed for use with water straight from the tap and ensures that the water is clean and safe to make a bottle feed Listen out for the beep and the empty warning light should come on. level low warning light will illuminate once the water has flushed through the system.

This means that any volume below 100 ml may vary by +/- 5 ml, and any volume above 100 ml may vary by +/- 5%. Our Closer to Nature baby bottles all meet or surpass the requirements for volume tolerances as specified by European Standard EN 14350.

Take a look at the image below for more information on why the Perfect Prep Filter is the best for use in the Perfect Prep™ machine. With the water hopper in place (but not the filter) fill the hopper with 1 litre of freshly boiled hot water.

Pop a container under the dispenser outlet to capture the water used to clean the system (ideally at least 1 litre capacity). The empty warning light should be off. The hot light should be on. Tommee Tippee Perfect Prep Replacement Filter: For use with both the original Tommee Tippee Perfect Prep machine and the Tommee Tippee Perfect Prep Day and Night machine Regularly top it up with cold tap water rather than letting a full unit stand and warm for long periods of time. Press the descale button for 2 seconds and the system will run a descale process. During the descale process the red descale light will continue to flash.

Before first use you need to run a cleaning cycle – which should take approximately 10 minutes. For hygiene and safety reasons you should clean your unit on a regular basis.

As is normal with all manufactured products, the Perfect Prep™ machine dispensed water volume has an allowed tolerance of +/- 5%. Additionally, there are potential tolerances in the measurement graduations of our Closer to Nature bottles. At this time the lid, hopper and bottle stand should also be cleaned using hot soapy water, rinsed thoroughly, and allowed to dry naturally (do not use cloths or tea towels to dry).Unique Filtration Membrane: Inside each Perfect Prep Filter there is a unique filtration membrane which removes bacteria and other contaminants that can be found in water Being a parent takes energy, courage, strength and creativity every day. It’s a role you can never truly prepare for, because when a baby is born, so are parents. We’re here to help. Our first creation was a baby cup that wouldn’t tip over. We never stop inventing. From award-winning breast-like teats to sleep-saving bottle preparation, we create ingenious products that make life a little easier for parents all over the world. #ParentOn Using a cold-water sterilising solution (following manufacturer guidelines for using with 1.8 litres of water), add required amount to the water tank. Fill the tank to the max line with cold water and place a suitable container under the dispenser spout. Press the start/stop button. A green light will flash, and water will be dispensed to finish the cycle. The contents should be discarded.