Use a Polyvance airless plastic welding tool with the FiberFlex welding rod to fill the v-grooved foam completely. Be sure to change either the amount of filler that you apply or the size of the area that you cover, otherwise, you will end up with the same failure.

The only way to guarantee that the same cracks will not come back in the same place is to grind them out right through to the base foam. The length of this video is in no way representative of the actual time required to perform a complete repair and therefore should not be used for estimating purposes. Without the primer, the top-coat will only be absorbed by the rubber in the undercoating, keeping the final coat of paint from protecting the dash. Ultimately, you want to build-up a texture that is uniform and smooth across the entire dash surface that will fully conceal the filler and weld repairs.If a batch is mixed in the proper proportion, you should have about 2 mins working time to spread it over the plastic welds. So looking at this has left me with the prospect of trying to re-create one in Fiber glass without destroying a Mint original in the process.

Work quickly down the weld until it is fully covered with filler or until you run out of your mixture. This is the same welding material that is used to repair the TPO plastic used in many bumpers on today's cars. The first step is to clean the surface with 1000 Super Clean plastic cleaner to remove any silicone dressings that may have been applied. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If you make the groove too shallow or fail to give it the proper V-shape, the filling product will not adhere properly.Step 6 in the booklet is a colour mixing guide and this proved invaluable for colour matching the leather. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

If you have major cracks or other damage like the dash I used for my repair, I think you would be better off trying out this DIY.Continue to melt the stick into the groove until it becomes taffy-like, making sure to fully melt it so the weld completely flows into the open space. The finished dash looks nearly brand-new thanks to plastic repair products from the innovator in plastic repair, Polyvance. The rubberized undercoating may not be ideal, but it does provide enough build-up to completely conceal the repair below the surface, it's elastromeric, sticks like a SOB to anything it's sprayed on and seems ideal for large-scale damage to a dash. Apply Padded Dash Filler over the repair, several inches on either side of the welded area to bury the edges of the v-grooved area. This is the first step of the repair sequence - opening up the crack and removing the curled up vinyl.

Wipe down the entire dash again and if there are any high spots from the welding stick, you can either re-melt it to reduce its height or sand it down. SEM makes three types of black paint for re-spraying plastic and vinyl car interiors: Landau, Satin and Gloss. Make sure this is thoroughly clean and wiped with rubbing alcohol creating a grease-free surface to which the repair compounds can properly adhere. After laying down your first thin coat, allow the product to flash for about 10 mins before spraying another one. FiberFlex Welding Rods with the airless plastic welding side of a nitrogen plastic welder or an one of our other airless plastic welders.The coating then becomes hard, brittle, and can no longer expand or contract in relation to the temperature. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. com/en 4x4 and SUV spare parts - Accessories Equipments - Toyota, Nissan, Mitsubishi, Jeep, LandRover, Suzuki, Peugeot, Renault . You should continue melting the welding stick into the groove until you are able to bring it within 1/8” of the top surface of the dash. Using a Dremel tool with a drum sander, or a rotary sander, sand back the puckered vinyl cover until the cover is fairly flat.