This version of the many anti fraying liquids available today is made by June Tailor. It comes in different sizes and the large size measures about 1 1/2 fl. oz. The purpose of this product is to help sewers keep their fabrics from fraying without having to stop what they are doing to sew extra stitches. You can use the brush system if you do not want to get a blob of adhesive in one spot or you can move your hand carefully and steadily to make sure you do not put too much on at one time. Masking tape is one of the easiest and most economical ways to secure fabric edges while embroidering. The smaller the project, the narrower your tape should be. Fold the tape around so that the fabric edge is in the middle. Masking tape comes off easily, and any residue can be removed with a damp, soapy cloth. If you’re using an actual frame to display your work, you can leave the tape on so long as there’s enough material that it won’t show. Pinking shears

Finishing fabric edges is precisely the purpose of a serger, and it’s so effective that all commercially-made clothing items have overcast edges produced by commercial sergers. The liquid solidifies slightly when not in use. But that’s okay because just 30 seconds under warm running water will return it to its liquid form and allow it to run smoothly from the tube to the fabric. You need to squeeze the bottle a little to keep the liquid from flowing, but squeeze gently so that you don’t take too much at one time. Once you’ve applied the glue, wait for it to dry before moving on to that part of the project.

TIPS FOR SEWING BUTTONHOLES

For this method, you can use your sewing machine to sew a straight stitch down the seam allowance. Then, take your needle and hand-sew even-spaced stitches along the edge of the fabric. 5. Bound Edges With Bias Tape To Prevent Fraying Instead of cutting embroidery thread ends straight across, cut them on a diagonal. A diagonal cut will help prevent or slow the progress of unraveling by staggering the twisted fiber ends. The effectiveness of this solution depends on the type of fiber being used. It’s a simple fix that’s worth a try. Glue or melt thread ends together The liquid stitch option is a permanent fabric glue that will not go away. One of the more positive aspects of a liquid stitch is that it will work on anything. It is a tough glue that has very strong holding power.

It is easy to use and all you have to do is open the cap and poke a hole in the sealed top to get access to the contents. Once you have the hole poked, the applicator should direct the adhesive to the point where you need it applied. Starch is another top contender and it is easy to find in your supermarket. A double dose of starch on the edges of fabric should keep all the threads in line and the material looking good. The Leonis instant hem tape blends smoothly into the fabric to create natural-looking hemlines with 6 different color choices available to match different items of clothing. This instant hemming fabric tape creates a much more flexible hem than common non-woven fusible web tapes that usually harden the fabric. If all else fails, hand-sew that baby! Morgan did some gorgeous hand-sewn buttonholes here, and there is a wonderful tutorial on By Gum By Golly.The tube comes with a small applicator that only needs a small hole to introduce the liquid into your fabric. The small hole slows down the flow so you can keep control of the application at all times. There should be little risk of this fraying weave being applied too much to your fabrics. Thankfully, there are plenty of easy methods to contain those cut edges and prevent fraying. Let’s explore them. How To Keep Fabric From Fraying The key is to hold the iron over where you used this product and the steam handle the rest. You can temporarily place the iron on the spot you just glued, but that is certainly not a long stay. You will need to pull on the threads along the cut edges to loosen the fibers and create the desired amount of fraying. With a little bit of effort, you can easily achieve the perfect frayed edge. But be patient! It can take some time for the fraying to really get started, but if you’re patient and let the fabric do its thing, you’ll be rewarded with beautiful, delicate frayed edges.

Then be careful not to use this product near an open flame or heat source. it can be highly flammable and you don’t want accidents to happen. Once it dries, the liquid dries very clear and no one should know you used it unless you say you used it. The key is to hold the iron above the spot where you used this product and let the steam handle the rest. You can place the iron temporarily on the spot you just glued but that is not a long stay by any means. Make your buttonholes the right size. In general, it should be the length of your button plus 1/8" on either end for wiggle room. Begin with a freshly cut edge free of loose threads. Use multiple strokes, but avoid loading the brush with too much polish, as it can become more visible than desired. Let it dry for 10-15 minutes before testing the fabric’s edge and beginning to sew. If you notice fraying in any spots, apply a little more nail polish. Next up, we have pinking shears. That might sound like a fancy new term to you, but in all likelihood, you’ve received aida with pinked edges. Simple little shark teeth like cuts. Thankfully a pair of scissors does this for you, meaning all you have to do is cut your fabric out. We should say however that whilst this is a common method used to stop fraying, it doesn’t actually stop it. Instead, it reduces the impact of fraying. If you intend to really get hands-on with your fabric, this technique might not work too well.Don’t if you see some discoloration. This product may or may not be dry cleaned. It depends on the substances you are applying it to. That is why taking a test is important. You will see first hand if there is a problem with the product after it dries. How long does it take for the fraying control to dry? It may take several tries with the rubbing alcohol but eventually, the stain should disappear. If the rubbing alcohol is not handy or you do not have any in the house, use nail polish remover. Fraying is when the material’s threads loosen and unravel from the rest of the fabric. This happens with all woven materials, and you’ll notice it along cut edges.

A powerful sewing machine may not even notice the sealant but the needle would have to be extra strong to endure constant hitting of this hard fabric area. As we all know, the needle is a fragile piece of sewing equipment at times. Always, always stabilize the area where you are installing the buttonhole. You are piercing that area with a needle and thread many times over and you are asking for a frayed mess without it. Tear away stabilizer is a good option for areas that are not otherwise interfaced. You will have to squeeze the bottle a little bit to make the liquid flow but squeeze gently so that you do not get too much at one time. Once you have applied the adhesive you just wait for it to dry before continuing on with that part of the project.

VIDEO TUTORIAL:

The way I personally prefer to edge my fabric, however, is tape. If you wanted the cheapest option, sellotape works, but masking doesn’t leave any residue. It’s fast to apply, is super cheap, and works just as well (if not better) than the other options on our list. A sewn finish (either with a serger or sewing machine) uses thread to finish the edge of the fabric and prevent unraveling threads. This method is best for fabrics that will be washed or used frequently, but it’s not ideal for sheer materials because it might add bulk or could look unsightly. 1. Overcasting With A Serger To Stop Fraying But the main point is that you don’t need to finish the raw edge of the hem – just cover it with the tape and you will have no fraying! If you are interested in overcasting by hand, there are a few things to keep in mind. First, use a high-quality, smooth mercerized thread that doesn’t tangle. Second, work with a single strand of thread. And finally, take your time and be careful to make even parallel stitches.