The size and spacing of the trowel teeth are the basis to measure tile trowel size. This tells you how much adhesive the trowel will leave on the substrate when you spread it out. The trowel’s tooth shape and spacing determines how much adhesive is sandwiched between the tile and substrate once the tile is fully installed. Karndean PSA: suitable for normal environments protected from direct sunlight, Karndean PSA is a solvent-free high grab Pressure Sensitive Adhesive with superior bonding strength. This type of adhesive is applied with A2 notched trowel and needs 20 minutes for airing, and allows for 120 minutes working time. Determining which trowel size is correct for your tile placement depends on both the tile itself and the substrate. More accurately, it depends on how flat the tile and substrate are. The less flat the tile is, the more adhesive you need beneath it, which means a larger trowel size. For the best results, we recommend using Karndean adhesives. Specially formulated to be used in conjunction with our products, Karndean adhesives can be used in live environments without the need for special requirements or ventilation.

KARNDEAN A2 TROWEL/SPREADER - 2mm v-notched trowel used to apply vinyl tile adhesive to the subfloor for laying luxury vinyl tiles such as Karndean,Amtico,Camaro,Lifestyle etc Accessories Product U-notched trowel leaves a 3mm bed of adhesive U-notched or square-notched trowel? Which shape of tile trowel to use U-notched trowels make it easier to keep adhesive out of the grout lines as you embed the tile. There is more space between the half-moon ridges with a U-notched than there is with a square-notched. This makes it easier to have the tile drop into the bed with the edge over an open area between the ridges than over the top of a standing ridge. Since the adhesive spreads out, rather than folding over first, it is less likely that adhesive will fill the grout line as you embed the tile. We offer a range of four adhesives suitable for our different product formats and project situations. Above and beyond using the proper method to get proper coverage for a successful placement, your personal preference will help determine which specific tile trowel you use for different types of placement.

Proper adhesive coverage meansa minimum of 85% total coverage beneath a tile for a dry area placement (most floors, fireplace, etc.) and 95% minimum total coverage in a wet area (showers, bath surrounds, etc.).

Since a 10mm U-notched trowel and a 6mm square-notched trowel will both leave a 3mm layer of adhesive mortar beneath an installed tile, why choose one over the other? Karndean Universal: ideal for our gluedown ranges and most subfloors, this is a fibre reinforced adhesive which allows planks and tiles to be laid almost immediately after application. The fibre reinforced format reduces lateral movement during installation and offers improved indentation and shear resistance. This adhesive has GEV-EMICODE® EC1+ accreditation and is recommended for use with underfloor heating systems. Karndean Universal is applied with A2 notched trowel and needs 10 minutes or less for airing, and allows for 20 minutes working time. Lowest Prices on major brands!: Amtico; Luvanto; Karndean; Polyflor; Forbo; Cormar Carpets; Abingdon Flooring & others. The square ridges, put down with a square-notched trowel, tend to collapse over on each side when you embed the tile into the bed. Pushing the tile down into the bed of square ridges causes the ridges to fold over from the top of the ridge, then spread out.There is more to that requirement such as complete coverage beneath all four corners of the tile, but those are the basics. When you fully embed the tile into the bed of adhesive, it spreads out the adhesive ridges evenly into the spaces between the trowel lines. Since the spaces between the ridges have the same size as the ridges themselves, this will split the height of the ridges in half. So a 12mm x 12mm trowel will leave a 6mm high bed of adhesive beneath the tile. A 6mm x 6mm trowel will leave a 3mm bed of adhesive beneath the tile. x 1.5 is about right.....just measured one of several. I also noticed although the centres stay the same ( 3mm ) the depth varies probably due to different batches. A2 adhesive spreaders are used as a Karndean trowel or an Amtico trowel, also suitable for use on all other LVT’S