Black Access Bend 110mm Soil Pipe allows access within the soil stack to enable easy testing, cleaning and maintenance of the soil system. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

It is important to note that linseed oil staining is only a temporary stain and exposure to sunlight, will over time, lift the marks. Specialists in brick cutting and fabrication, the company manufactures the FastClad Brick Slip System, FastArch lightweight brick clad arches and FastCut cut and bonded brick specials. If using the wet method, ensure that the bedding mix is permeable and made up from a mix no stronger of 6 parts sharp sand to one cement. If raining or elutrifying is carried out, the hardening time may increase by 24-72 hours depending on temperature.But i couldnt get a straight answer, each person would point me to another who usually had less knowledge. Someone did so much of patio before lockdown using way more than it says then I’ve finished it with this tub and gone further with me. The 110mm Black Soil Access Pipe allows access within the soil stack to enable easy testing, cleaning and maintenance of the soil system. There is no need to push EASY Joint into the joints, our paving compound does the hard work for you, falling into the paving gaps, filling voids and compacting.

Wet the paving, brush in the compound, then strike the joints for a smooth finish and stronger, durable joint. A beautiful ombre mica sweeps through this tranquil natural twig design, The innocence mushroom wallpaper features a tranquil twig design underpinned by a delicate calico fabric effect and combined with a classic grey colourway. I'm 67 years old and female, I raked out all the old loose mortar then followed the instructions on the tub, its made the patio like new, I'm really pleased with the product and would recommend it. Any residual material on the stone surface can still be swept off after 24 hours with a coarse street broom.Pour the pavement fixing mortar immediately onto the surface and using a coarse street broom or squeegee spread it evenly so that it goes into the joints deeply, firmly and compactly. You wet the paving with water before starting and then sweep and wash the compound into the joints and gaps, letting the water take the strain, using a brush or squeegee really helps here, please also see our recommended application tools, also listed at the base of this page.

Particularly sensitive, porous stone should always be sealed on both sides and all edges as a precaution. A stronger mix may cause the base to become impermeable and this will mean that water does not drain away. Important instructions: In case of doubt always lay a sample surface before doing the entire jointing. Yes, you can clean our paving joints with a pressure washer but it must be done cautiously and after the EASY Joint sweep in sand has set hard.

It is suitable for all types of paving material provided there is a gap of at least 3mm wide and 20mm deep. Makes hard landscaping even easier because the product is best installed in wet conditions; rain or shine, it goes in fine.

He'd agree to clean the soil to a depth of 500 mm as i wantred gardens and lawns done by myself in the next two years , and do the patio properly as requested . Very fast to use: The use of water to wash and fill the joints between the paving is a breakthrough in jointing methodology.EH Smith is an authorised distributor of Porotherm, the precision-engineered clay block walling system from Wienerberger which is designed to provide a faster, dryer, safer and more sustainable building process. I personally would recommend using a small bit of hose pipe or jointing tool just to smooth the surface of the product once it's all swept in. Our sealers can protect against most common spills and are resistant to tea and coffee, red wine and engine oil, mayonnaise, vinegar, and ketchup etc. Bit apprehensive as patio was being laid on an old concrete sub base however kept the mortar mix at >6:1 to enable water drainage and everything went like clockwork. It is important to note that linseed oil staining is only a temporary stain and exposure to sunlight, will over time, lift the marks and fade away.