The hub supports fast data transfers up to 5Gbps for expanding USB ports or connecting multiple devices. It also has USB on the go and simultaneous transfers across all ports. It’s plug-and-play, and no extra drivers are needed for PC, Mac, or select versions of Linux (2.6.14 or later). An integrated safety chip offers overcurrent, overcharge, overvoltage, overheat, and short-circuit protection for both the hub and any connected devices.

Not every USB Hub is one of the best USB hubs you can buy. We tested a number of other models that are worth considering, but not necessarily at the head of the class. Any extra connectivity? Some USB-C hubs will come with HDMI out, allowing you to connect to a monitor, provided that your PC can output video from its Type-C port. Other hubs have microSD or SD card readers built-in. The chassis is aluminum, so it’s rugged yet lightweight, and it looks great, too. This is the ultimate hub for anyone who wants to connect several devices or transfer data from multiple USB sources simultaneously. It's worth noting that when plugged into a computer, there is some connection latency for the higher-count ports. But the first four ports are fast and responsive. Anyone who works with microcontrollers such as the Raspberry Pi Pico or any Arduino board knows that most of these devices don't have on / off switches or even reset buttons. So, if you change code and need to restart them or you just want to power them off, you often need to yank the plug in and out, a huge hassle that could damage your gear. But with the Sabrent HB-B7C3, you can just toggle power on whatever port your microcontroller is plugged into.Ethernet is easier, as it’s hard to find a hub that doesn’t support Gigabit Ethernet speeds. That said, a small number now support the faster 2.5 Gigabit (2.5GbE) standard, which isn’t a priority for most home networks, but a plus for advanced users or just for future proofing. In addition to the SSD, the Anker PowerExpand has an HDMI out port and two USB 3.x Type-A ports that operate at 5 Gbps. There’s a USB-C power pass-through you can plug your laptop’s power adapter – up to a 100-watt unit – so that you can charge your computer while using this hub (the USB-C port does not work for data transfer; we tried). Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.

Speed: Most USB hubs operate at standard USB 3.0 (aka USB 3.2 Gen 1) speeds of 5 Gbps. However, a few can deliver 10 Gbps. There are also some cheapies that are limited to USB 2; avoid those at all costs. The durable aluminum shell rounds out the features list and offers a sleek look. It matches particularly well with aluminum Chromebooks, laptops, and most MacBooks. Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD.

I have been using the Sabrent HB-BUP7, the nearly-identical 7-port sibling to the HB-B7C3, as my daily driver for more than a year, and having these buttons is a real game changer. Changing default audio devices in Windows is a royal pain, requiring one to go into the control panel to, for example, make sound come out of your headset instead of your speakers. But with the power switches, I just turn off my USB speaker and turn on the wireless headphone dongle, or vice versa. This beast is almost 9 inches long and weighs 1.8 pounds. Every port has a power switch and a bright blue LED indicator. You can turn ports on and off individually, and the light will tell you what’s powered and in use. It’s plug-and-play compatible with PC, Mac, and Linux systems. It has a built-in surge protector to keep all your devices and the hub safe and secure from electrical failures. We also connected an Android phone to the ports and recorded how many volts and amps it received. The phone charging test was probably the most realistic as it showed what kind of volts and amps a real device would negotiate with the hub. If you're using an external storage device – perhaps an NVMe drive you've put in one of the best SSD enclosures– you’d benefit a great deal from using a hub that supports 10 Gbps connections – alternatively known as USB 3.1 Gen 2 or USB 3.2 Gen 2. Unfortunately, very few USB hubs actually support these higher speeds and even fewer still support the 10 Gbps speed when it comes from a Type-A, rather than a Type-C, port.

Sabrent's HB-U3CR looks like it was built for MacBooks, thanks to a gunmetal gray aluminum chassis and a stylish, slanted design that will prop it up at an insertion-friendly angle on any table. However, it's an equally strong choice for use with a PC laptop that has USB-C ports and needs a few USB Type-A connections. Some USB-C hubs go further by incorporating USB-PD passthrough. Here the idea isn’t so much to power the connected devices as to power the laptop the hub connects to, so that you just connect the laptop to the hub, and it charges as you use it without the charger taking up the spare USB-C port. The key thing here is how much power the hub can supply. Most will deliver 80W or more when used with a 100W charger, which should more than cover any laptop. However, with some you’re looking at 50W or less, which might mean missing out on fast-charging modes on some of those laptops that support them. There are still a couple of caveats here. First, your device needs to support a DisplayPort 1.4 video output over USB-C, which will count out many Chromebooks and some MacBooks and Windows laptops. Second, the hub itself takes 15W of power, which means that – even with a 100W USB-PD charger – you may find some laptops not charging at their highest speeds. But if you’re happy to live with these compromises, this is one of the best USB-C hubs we’ve seen. If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place.Powered or not? Some USB hubs come with their own AC adapters so that they can provide more power than your computer delivers from one of its ports. Bus power from your computer can be pretty low, not enough to juice several power-hungry peripherals at once or to charge devices at a reasonable rate. By definition, a USB hub that needs its own plug isn’t very portable.