bssUpdateChannel), ucPrimCh=1, ucCentChSeg0=3, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 MtCmdSetTxRxPath: ctrl_chl=60, ctrl_ch2=0, cent_ch=60, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1)

I do need to mention that the Asus RT-AX53U does support OFDMA (with no mention on whether it’s only on the 5GHz radio band), MU-MIMO (2×2, of course) and up to 80MHz channel bandwidth, which is fine for most house-based networks. WtcSetMaxStaNum: MaxStaNum:226, BssidNum:12, WdsNum:16, MSTANum:1, MaxNumChipRept:32, MinMcastWcid:275 MtCmdChannelSwitch: ctrl_chl=44, ctrl_ch2=0, cent_ch=44 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) generációs WiFi szabvány –A WiFi 6(802.11ax) szabvány a jobb hatékonyság és a nagyobb átviteli kapacitás eléréséhez támogatja a MU-MIMO és az OFDMA technológiát.rast_ini[ 70.120947] ##### drivers/net/wireless/mediatek/mt_wifi_7915_v7400/mt_wifi_ap/../mt_wifi/embedded/ap/ap_cfg.c: RTMPIoctlGetMacMode:12622 MacMode = 0

MtCmdSetTxRxPath: ctrl_chl=2, ctrl_ch2=0, cent_ch=2, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) Actual data throughput and WiFi coverage will vary from network conditions and environmental factors, including the volume of network traffic, building material and construction, and network overhead, result in lower actual data throughput and wireless coverage.MtCmdChannelSwitch: ctrl_chl=100, ctrl_ch2=0, cent_ch=100 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) Also, the wireless performance was quite good on the 2.4GHz band but even so, I am very confident that you won’t see OFDMA on the 2.4GHz band for any inexpensive device for a very long time (the Asus RT-AX53U included). Then there’s the MU-MIMO which a lot of people argue that it doesn’t make any difference and I wrote a little bit about it as well, but the idea is that this technology makes much more sense on WiFi 6.