These are the best of both worlds as they use chemical substances with more natural ingredients. These wood stain removers consist of ingredients that are both safer to use and better for the environment. Some examples of ingredients in these wood stain removers include citric acid, soy oil, and wood pulp extract. How to remove wood stains? Solvents work by dissolving the old finish with chemicals. Examples of solvents in wood stain removers include alcohol, acetone, and toluene. Solvents are some of the only wood stain removers that can dissolve paint. Unfortunately, they’re usually the most toxic. Remove food, oil, and grease stains as soon as you spot them. That way, stains won’t form, to begin with. But, if you wait too long, you’ll have to put in some work to remove the stain. Kathy Cohoon, franchise owner at Two Maids & A Mop, shared expertise on how to approach laundry stain removal and what to look for when purchasing a stain fighter.

Animal poop can carry harmful diseases, so always wear gloves to clean it up. Animal poop stains are generally easier to get off than other stains. Start by scrubbing it with warm, soapy water and a bristle brush. If you’re using your wood stain remover on furniture, place your remover on top of a drop cloth and remove any metal objects around the area. If you’re using it on wooden floors, place painter’s tape along the seams where the wall meets the floor. Follow the manufacturer’s instructions and apply the remover to the wood surface. When the surface begins to bubble, it’s time to scrape. Best Wood Stain Removers Wood stain remover is toxic. Wear a face mask, google, and gloves while using it. If you’re working indoors, make sure the room is ventilated, as the remover’s fumes are strong.You have to remember to wear your gloves before handling this chemical product. However, it is good enough you are working on an outdoor project.

If your wood is coated with wood oils, whether that be teak oil, linseed oil or another type of wood oil we’d first and foremost recommend you strip them using Aquanett. It’s designed specifically for removing wood oils and it’s a gel formula so it’s easy to use.Give it a good scrub with a stiff brush. Scrub along the grooves and also across them to help loosen the old coating. Pour on some water and keep scrubbing. This will help lift the finish completely off. You’ll start by applying the wood stain remover with a pump-up sprayer. Then, wait for at least 20-30 minutes for the finish to break down. If needed, you can add additional coats to the wood to keep it wet. Finally, rinse the remover off with a pressure washer, and you’re done. After the remover has swelled or bubbled up, scrape off the finish with a plastic scraper or a putty knife. Use gentle force, and try to scrape the finish into a trash can. Do I have to re-strip and start all over to fix this? Can I do that right away, when I just stained it 24 hours ago?

Step 4: If you don’t enjoy the tedious work in step three, then go ahead and use a pressure washer. Hold the pressure washer wand at 12-inches above the wood surface, release the trigger and wash away the loose stains from the surface.This product seemed to work better on set-in stains. For those spots and smears that you've been putting off, or that need more attention, it's worth your consideration—as long as it's not wine or foundation, as those faded but were not completely removed. It also has a very light scent, which our tester found to be pleasant.