Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards

Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0 Updated Modbus Client to handle large numbers of schedule rules, when frequency is set to schedule (Daini Copies the state from the selected input and applies it to the selected output. This can be used instead of specifying a static state. When expansion is enabled, do not detach the USB device as this will delete the data stored on it. Changes made to the device configuration while expansion was enabled will disappear after it is disabled. IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)Getting the current state of various I/O is possible using requests. Usage is very similar to the examples above: A and ⏚ 1 - ADC input. Analog voltage range: 0-24 V. The input can be configured for 4-20 mA sensor protocol as current measurement (ACL). *

Possibility to use different PDNs for multiple network access and services (not available in standard FW) The Teltonika RUT955is a highly reliable and secure industrial 4G LTE router that delivers high performance. mission-critical cellular communicationand GPS location capabilities. Fixed provider information and IMSI value representation when SIM and modem cannot provide this information Note: Firmware version RUT9_R_00.07.01.1 released on 2021.11.22 was removed due to an issue with IPsec tunnel while using mobile connection.TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem The Actions section is used to manage and create new Actions that can be executed by the I/O Juggler Rules. The figure below is an example of the Actions section, which is empty by default.

Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP RUT955's can be remotely managed through Teltonika's RMS - Remote Management Software - which allows you to access, monitor and manage all your devices within a single platform from your computer, tablet, or phone. DC or PoE Power Fixed Storage Memory Expansion issues related to upgrading from version 6.X with the 'Keep settings' option Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network TypeAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP By default, the lists are empty. A set certificates generated using 'Simple' file type would look something like this: Additional note: SIM PIN on the main SIM card is the only user parameter that is kept after a factory reset. The General Configuration section is used to enable the Scheduler itself. Created instances won't work unless this option is turned on. CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance CE/RED, FCC, IC, PTCRB, RCM, EAC, CCC, RoHS, WEEE, IP rating, Anatel, GCF, REACH, E-mark, DNV GL, ECE Regulation 118, Morocco ANRT, Thailand NBTC, Ukraine UCRF, SDPPI (POSTEL), WiFi Certified, MODBUS Conformance

The Sign the certificate slider control whether the certificate will be signed automatically or manually after the generation is complete. Choose this option if you want to select certificate files from device. Certificate files can be generated in Certificates section. Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T Output pin. The state of the selected output will be set to "High" during the time interval defined in the fields below.

Navigation menu

The Certificates, Keys and Requests section display files generated on or imported to the device along with the most important information related to them. Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server Fixed Load Balancing, GRE, MQTT broker, IP alias, Operator list & SIM operator connection migration from legacy firmwares Please Note: This product has been discontinued. For the replacement model, please see the Teltonika RUT956. Teltonika RUT955 4G LTERS232/RS485 Router While holding the reset button, plug the power cable into the router. Continue holding the button for another 4 seconds.