The Panacol product line of Elecolit ® conductive adhesives are both electrically and thermally conductive adhesives. Elecolit ® conductive adhesives contain metallic filling materials, primarily silver flakes. This creates efficient energy flow and high conductivity. There are many kinds of conductive epoxies, glues, and rubbers available. Unfortunately, they are for the most part quite expensive.

Production line considerations. Firstly, how fast is the throughput? Secondly, is the process fully automated or manual? How will you dispense the adhesive? To glue two wires together, if you can, you should first twist or crimp them together and then coat them all the way around with conductive glue. If you merely lay them side by side without touching and then glue them, the resistance of the glue joint will be in 7-9 ohm range. See fig-A if you are using conductive thread (resistance is about 2 ohms per inch) for wires, you can tie an overhand knot to the wire you are connecting to and then coat all around it with the glue. Electrically conductive adhesives are primarily used for electronics assembly. These adhesives are ideal for electrical interconnect but also for thermal and structural bonding applications, offering improved reliability in electronic systems.An unfilled epoxy with independent heat-curing (50 minutes at 80°C) and light-curing (4 seconds at 150 mW/cm2) mechanisms. Very high Tg of 179°C. A high viscosity unfilled epoxy with independent heat-curing (60 minutes at 80°C) and light-curing (5 - 10 seconds at 60 mW/cm2) mechanisms. Additionally, Henkel’s chemical technologies ensure easy application in any setting. Whether that’s using snap cure, heat cure, room-temperature cure, or dual component conductive adhesives. Learn more about our electrically conductive glues, adhesives, and epoxies below and discover how Henkel can advance your automotive, medical, telecom, and consumer devices through better materials designed to meet today’s challenges. Henkel thermally conductive glue products combine fantastic bonding abilities with unrivaled thermal management capabilities. This allows for necessary heat dissipation in heat-generating components, while also reducing the need for clips and screws. This makes conductive adhesives the perfect option when assembling smaller, lighter electronics. A fast-curing epoxy (3 minutes at 150°C) with excellent compliance for larger die applications. Can be light-fixed in seconds for high-placement accuracy. Very long pot life of 7 days.

This measures the electrical conductivity or electrical resistance of materials, taking into account sample dimensions (hence the “volume” part). Test standards associated with this are the old MIL STD-883, ASTM D2739, and ASTM D257-99, a test method for measuring DC resistance or conductance of insulating materials. Units of measurement associated with Volume resistivity are typically Ohm∙cm. Accordingly, the lower the figure, the more electrically conductive the adhesive is. What do isotropic and anisotropic mean in relation to electrically conductive adhesives? Thermally conductive adhesives are thermally conductive products designed to offer effective thermal management in heat-generating components, combined with effective bonding power to join components.Syringe: A Syringe may come with your adhesive and can be used for tight to reach places. If you need to inject amounts into corners or holes, a syringe is perfect for this type of job. Records the default button state of the corresponding category & the status of CCPA. It works only in coordination with the primary cookie.