In no time at all, I was able to successfully install our motherboard onto the motherboard tray. The stand-off were already in place for the SSI-CEB form factor motherboards, and I did not have to add or remove any standoffs from the tray.

Nowhere does it say you need 2 x USB 3.0 19-pin header – for 4 x USB 3.0 Type-A ports at the front of the case Extensive tool-less design minimises the use of screws when assembling the system, saving time for the user. Storage drives, panels, even the GPU and PSU installation are tool-free processes. I don’t expect anything more from a PC case. The HAF 700 EVO sets a new benchmark for a next generation of high-end premium desktop full tower case. It is highly usable, spacious, performs extremely well in terms of cooling, and also very versatile as well. Of course, we can’t forget about how the case brings “tool-less” design to the next level. Fan mounts: 2x 200mm front, 2x 200/3x 140mm/6x 120mm roof, side, 3x 140mm/4x 120mm 120mm/140mm floor, 2x 120mm rear.Our acoustic test consists of three scenarios: We run the CPU at full load, the CPU and GPU at full load, and an optimized mode. The CPU full load test runs the CPU and case fans at their maximum speed. For the CPU and GPU full load acoustic test, we also stress the Gigabyte RTX 3070 Ti Gaming OC and set the fans at 75% speed, because in gaming the fans never run at 100 percent and are far too loud when they do. Forget about pretty faces and handsome presenters. Here at The Tech Revolutionist, we go deep into technology to look at how things work, and how it affects the society today.

The largest standard hardware can fit in this chassis. You get up to 6.54 inches (166 mm) of height clearance for CPU coolers and 19.29 inches (490 mm) for GPU length. Cooler Master even says the case supports workstation motherboard form factors like SSR-CEB/EEB. Mini-ITX and Micro-ATX are also supported along with standard ATX. But installing anything less than a full-ATX motherboard in here would look pretty silly.The HAF 700 Evo is almost entirely tool-less and you can install almost any component without the need for screwdrivers , including: