The wall plaster in the areas shown will be replaced using a specialist rendering system. The premix waterproof rendering system is factory produced and consists of specially blended dried sands, cement, lime and aggregates along with polyproplyene fibres to reduce shrinkage.

Ensure you clean the skirting boards before painting because woodwork tends to attract more dirt than walls. Use a small amount of detergent and wet ‘n’ dry abrasive paper to clean and sand the surface at the same time. The wall plaster shall be removed from floor level up to that shown on the sketch plan (I included a picture of the plan on my response above).

Alternatively, for a bolder aesthetic, go all out by choosing a skirting board colour that stands out intensely against your walls and/or floors. Create a striking contemporary look by twinning primary coloured skirting boards with walls and floors in shades of grey. Dealing with mould issues caused by damp is a little more complicated because before you can select the correct remedy, you first need to find out where the damp is coming from. MDF manufacturers produce a range of MDF sheet products with differing specifications and properties to suit a varied customer base.

Building and construction trades use a lot of 8’ x 4’ and 10’ x 4’ MDF sheets, so nearly all moisture resistant MDF in these sheet sizes will be green or have a green core. Darker skirting candraw the eyedownwards, so if you have a lower ceiling and want to give the illusion of more space, paint it a lighter colour and contrast itwill a dark ceiling or darker walls so the eye levelremainshigh," adds Ann Marie Cousins. What Colour Should Skirting Boards Be? To help with this, MDF manufacturers added a green dye to moisture resistant MDF sheets so they could be identified easily. MR MDF has a high internal bond strength, which makes it very versatile and suited to interior applications such as furniture manufacturing and mouldings like skirting boards, architrave, and window boards.One of the main markets for larger sheets of MDF is in the manufacture of moisture resistant MDF skirting boards and other interior mouldings. MDF needs to be primed to seal the MDF so that a topcoat of paint does not sink into the MDF material. Priming also allows for a quality final paint finish by creating a smooth surface on which the paint will be applied. As a rule of thumb, skirting boards have traditionally been white because most homes would have white walls. Nowadays though, more and more people choose to style at least one of the walls in the house with a contrasting colour. This changes things for skirting boards! Dark greens, soft pastels, clay and grey tones are on high demand, and matching skirting boards are a good element to bring a feeling of continuity and completion. You can take a look at some of the best bathroom extractor fans on the market at the moment in our guide.

Versatility: Dark skirting boards can work well with a variety of wall colours, including soft neutrals, pastels, and even bolder shades. This versatility allows designers to create different moods and styles within a room. There are various ways to adapt this style to your own home. For a subtle burst, consider painting the top of your skirting boards in a bright colour, choosing a hue that complements your walls. Think yellow skirting boards against purple walls or blue walls paired with orange skirting boards. White is still the most popular choice for skirting boards, and crisp white woodwork can frame a room beautifully,' says James. On the other hand, if yours is an older home, you may be better opting for a more ornate profile. "Decorative profiles including traditional ogee, ovolo, lambs tongue and torus designs work well in period settings," says Rebecca.In particular, moisture resistant (MR) MDF sheets that are 8’ x 4’ (2440mm x 1220mm) and 10’ x 4’ (3050mm x 1220mm) are green, with larger sheet sizes being brown in colour. Nowadays the majority of cases of damp in period houses are caused by inappropriate building work that stops moisture escaping," explains surveyor and damp consultant David Kinsey. "With older solid walls it is advisable to remove incompatible modern materials such as cement render or mortar pointing that trap damp. Replace with traditional lime-based breathable materials that allow moisture to evaporate."

A colour wheel can help you formulate a harmonious colour scheme for your skirting boards and walls by choosing colours close to each other on the wheel, or for a bolder, more dynamic aesthetic choosing colours that are further apart. Is space at a premium in your home? Are you looking for interior design tips to create a more spacious feel? Choosing a uniform colour for your walls and skirting boards could be the perfect solution. Once you have removed all traces of the mould it is very likely that you will need to repaint your skirting boards — thankfully, there are ways of painting over mould that will leave your skirting boards as good as new.

To achieve the look go for an Art Deco Skirting Board. 4. Opting for skirting boards in a lighter or darker colour to the walls Painting your skirting in asimilar colourpalette to the rest of the room looks really striking, adding depth andlayering to the space," comments Ann Marie Cousins.