Install soffit boards, nailing to each soffit bearer with 40mm Trimtop nails or capped screws. Allow the soffit board to overhang the rafter foot by 10mm to locate into the soffit groove at the rear of the fascia board.

Soffits are the boards you see most of from street level, keep them plain, keep the design sleek. We offer a range of over fascia ventilation and breather membranes allowing you to make your soffits a design feature and not an eyesore while retaining ventilation and air flow. In addition to their practical and aesthetic purposes, bargeboards can also be used as a way of expressing the unique character or identity of a building. This is why many people choose to install decorative bargeboards that are reflective of their personal tastes, the building’s historical significance, or the cultural identity of the area in which they live. This approach can be ideal if you want to minimize costs and want to avoid damaging cementing tiles. It is worth capping old barge boards if they are not too rotten and can this cheaper technique can extend the life of the barge boards by several years.

What is the standard size for a barge board?

if the lowest row of tiles can be pushed up out of the way while the fascia is positioned and fixed. Fix the fascia using plastic Nah. If the majority of the timber is sound, leave it there and repair the worst. Treat all bare repairs whatever with generous treatment lkie cuprinol wood preserver. Rosewood is a mahogany style colour finish but with the added benefit of an enhanced grain pattern. Some 'professionals' will clad over existing wood but this risks trapping moisture which could cause serious rot in the structure.

Yorkshireboy, are you saying just to clad without removing existing rot? That is not an option on the table. Rot is rot. decide for yourself how many or what form of ventilation you may want(or need). 75mm round vents in soffit(about every metre) or continuous pre-vented grill in solid board.If your fascias are damaged or have rotted, it’s important to get them replaced as soon as possible to limit any potential damage to your property. Remember that replacing fascia, soffit or bargeboard necessitates working at height and due care is necessary. It is not a job for a person on a ladder. Appropriate scaffolding is highly recommended. Fitting barge boards is similar to installing fascia boards – however the very important difference is that the barge boards need to be cut differently to fit the shape of the roof apex. The ends of the board need to be cut to create the shape in the image on the right. The new fascia should be pushed up under the ends of the tiles and levelled before fixing, it's easier to get the fascia straight Any rot in the ends of the rafter should be repaired using good quality timber treated with preservative.

If you have any questions about our range of barge boards, please do not hesitate to get in touch with our team of experts – we’re always happy to help! Barge boards are the diagonal panels that are affixed to the roof gable and run upwards to create the apex of the roof. They serve both a decorative and functional purpose; they are used to cover and protect any exposed material from the roof. Traditionally, barge boards were manufactured using wood – however, the modern alternative of uPVC is far more low maintenance and requires less replacement over the years. How to fit barge boards Cast Iron: Premier Primed Standard Rainwater, Premier Primed Sand Cast Rainwater, Premier LCC Soil, Halifax Soil & Drain Systems Fittings Only Learn how to install barge boards correctly to ensure your roof's durability. We provide a detailed, easy-to-follow installation guide. Bunnings Downpipes: Directing Rainwater with Precision

Conclusion

Re-protect the top of timber fascias with dpc between it and the tiles/felt. Cut the fascia 5mm shorter than height of timber(angle of tiles will meet it well) but only a mm short at gable end piece(for silicon sealant). Cladding Bargeboards with UPVC is similar to cladding fascias, the main difference is that some cutting of sheet UPVC will be Bargeboards also known as vergeboards or fascia boards are attached to the gables of a roof and secure the gutters in place. They provide the strength and protection that a home needs from weathering and although they play the same role as fascia boards, they tend to be used for more decorative purposes and come in styles such as square, bullnose and flat. Secondly, consider whether you are refurbishing or replacing your fascia, as the installation instructions will differ slightly. Once you have confirmed which route you are taking, you can get started.