As standard RGB LED tape comes with a 4 core cable with a 4 pin female connector on each end. This can be snipped off to leave you with bare wires or used with plug-in style controllers and connecting pins. The RGB+CCT features colour changing with colour temperature adjustable in one. You have the colour changing effects as well as an impressive colour temperature range of 2400K - 6500K. To select the correct LED driver (also known as an LED power supply or LED transformer) follow these 4 rules:

I've used six of the best selling brands in our comparison table. Each one is fire rated and dimmable as standard. Each one has an IP rating of IP54 to IP65 meaning they can all be used in bathrooms or in any room you like. The voltage of the LED tape must match the LED driver. If the LED tape is 12V, the LED driver must be 12V.It depends how easy is to run the cables. I prefer splitting the sections up and using smaller drivers. LED strip tape provides a continuous array of light that can be cut down to the size you require. It can also be extended to infinitely longer lengths by integrating additional accessories and LED drivers into the run. In general the 480 LEDs per metre COB tape, with an IP20 rating is ideal for the majority of applications.

Scottish Highlands, areas which we class as zone 1 are post codes: AB30-38, AB44-56, FK17-99, G83, IV1-28, IV30-32, IV33-39, IV52-54, IV63, KW1-14, PA21-33, PA34-40, PH18-26, PH30, PH31-41, PH49-50 Our systems can run just a few Meters to hundreds of Meters of Colour Changeable LED Strip and can be combined with our other Colour Changeable Light sources (shown below). By linking each of the Colour Flexi Drivers with a digital data and ground wire all of the LED lights are kept under the control of the ZEN Controller for synchronised colour changing and Zone control.Also known as CCT (correlated colour temperature) adjustable downlights, these types of lights provide you with the ability to change the colour temperature. Within one downlight, you have multiple colour temperatures that range from warm white to cool white. The variation of colour temperature ranges from each brand. We understand that it’s important to get the right finish to match the rest of your accessories and furnishings. Our LED downlights are available in a range of finishes including chrome, brass, gold, copper, bronze, and white. Scottish Islands:HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA30, PA32-34, PA41-49, PA60-78, PH42-44, ZE1-3

IP65 is water and dust resistant. It has a silicone glue coating that shields it from splashes and dust. Unlike many of the amateur 7 Colour Systems available our systems employ Digital Technology giving them a tremendous range of control, and the ability to display millions of colours, providing seamless colour sweeps at the speed and colour range you choose. Select from a vast choice of of whites, pastels, or vivid colours with the ability to freeze a colour indefinately. Control every Mood Light from the same remote, even with your Smartphone or Tablet from anywhere in the world!Our latest range of controllers are easier to operate with the Gledopto series that can be controlled from your smartphone or with a handheld remote or wall controller. These receivers can be connected to a zone of LED tape and allow you to control individual or multiple lights individually or all at once. We have Wi-Fi receivers that work with the Tuya App here, or a multifunction version that works with the Smart Life or the Philips Hue App here. Cable Connections Unsure about where to start? You can find out more in our guide which covers what makes a good downlight and what to look for when choosing them. We also explore the pros and cons of GU10 and integrated LED downlights as each come with their own set of advantages. strips have shorter cut points than 24V allowing for a more accurate measurement. But 24V strips are better for longer runs over 5M. Whether you are looking for kitchen downlights, recessed downlights, or a specific fitting or finish, we have you covered. The more advanced RGB+W and RGB+WW offers a mixture of colour changing LED tape with a dedicated cool or warm white all in one. You can either select a static colour, or mix any of the colours just like RGB. You can select the white colour temperature when you need to see more clearly what you're doing, which is ideal for cooking etc. Another key selling feature of this version is mixing the primary colours with warm or cool white which produces some unique orange and pink effects.