If you happen to pull off a connection the wire may remain in the rear of the oven and you will have to gain access to the rear. With rapid heat elements and an A energy rating, Lamona ovens fit seamlessly into any trendy kitchen design. Whether your oven is built in or freestanding, single or double, the first step of the repair is to remove the ‘back-plate’ from inside the fan oven. Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.

Lamona Fan Oven Heating Elements - UK Whitegoods

Alternatively, refer to your oven’s user manual if you still have it to determine the exact heating element you need to ensure you purchase its perfect match. This would normally not be considered as a fault – but if you’re worried about excessive steam then an experienced technician will diagnose and fix any fault for you. Any burning or bulging will be enough to confirm that a replacement oven element will need to be fitted.The problem in most cases is simply a faulty fan oven element which is a simple DIY task to replace. Finding Lamona spare parts for ovens, cooker and hobs can be hard as they are often very specific to a model or even a production run, even if they look alike and are about the same sizes it doesn't mean that they are correct. Good fan ovens spread heat evenly, so whether you're cooking near the top, bottom, back or front you should get similar results.

Element Man - supplier of Cooker, Fan, Grill Oven Elements The Element Man - supplier of Cooker, Fan, Grill Oven Elements

You may need professional advice to make sure you get the perfect replacement part when your oven knob is damaged.If the connections to the block are not tightened properly during installation this can cause issues such as excess heat and damage to the block itself. If the oven light is on and the element gets hot but the oven doesn’t this is another pointer to the motor.

Howdens Lamona Fan Oven/Cooker Heater Element (1800W)

Don't be alarmed if you see a few wisps of smoke escaping from the oven as it heats up—this is just the protective factory coating burning off the outside of the new element and isn’t anything to worry about. Luckily, replacing your baking element is a super simple and easy process, and in this article, we’ll teach you exactly how to do it safely.If you have an electrical test meter to hand you can use it to test your oven element for continuity.