gauge nailers are shooting nails slightly thinner as compared to that of the 15-gauge and has smaller heads. Depending on the brand, 16-gauge nailers are shooting nails that are from 3/4” to 2-1/2” inches long. And they also provide good holding power and make great general-use guns. I should add that some manufacturers have released angled versions of their most popular 16-ga finish straight nailers perhaps due to more people asking for them over the years (These include Dewalt and Milwaukee)

Nail guns can be categorised by the fuel they use to power their firing action. There are three categories: air, electric or gas. Furniture: Assembling furniture requires a lot of nailing, from attaching legs to frames to upholstering. A 15 gauge finish nailer is a perfect tool for fastening these types of joints securely and precisely. Tool less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish Put another way, use 16 ga finish nails for any project where it is desirable to have a nail with smaller head ‘footprint’.Before that, let us speak about the length of these nails(it is not fair to talk about 15 gauge nail diameter and fail to mention how long these nails are)… A: Loading a 15-gauge nailer is as simple as loading your stapler. Ensure your trigger is not activated before loading and point the nose of the nailer away from your body.

Needless to say, they should be strongly attached otherwise they cannot hold large loads, which is often the case in residential buildings.

So what diameter is 15 gauge nail?

You can use a finishing nailer or a brad nailer for skirting boards. A brad nailer will give you the best finish as it typically uses more discreet nails than a finishing nailer. However, a finishing nailer will have more holding power if the skirting board is heavier or bulkier than average. The pre-installed air fitting is at an upward angle, which keeps the hose out of the way of both the user and the gun.

Air nail guns are linked up to an air compressor via a hose. When the trigger is pulled, a powerful burst of air drives a hammer which forces a nail out of the gun. Air nail guns are often favoured over electric models because they are safer to use in certain areas where an electric tool could pose a risk, i.e., in damp areas or where there are combustible gases. ga nail heads are rounder (thus they tend to leave larger holes that you could then need to patch). The Makita AF635 boasts a magnesium body, aluminium magazine, and a powerful motor. It’s one of the most durable nailers on the market. Because most of them fire headless pins or very small-headed pins, they’re often used in conjunction with glue and therefore end up typically acting as a temporary clamp. They’re also a good option for installing beads and thin stops. They don’t split wood and leave a barely noticeable hole that requires minimal to no filling. These nailers are available in pneumatic and cordless configurations. How Much Do Pin Nailers Cost? Just so you know, 16 gauge nails usually have a diameter of 0.063 inches (compare that with 0.072 inches, the standard diameter of 15-ga nails..).Cabinet: Cabinets often have intricate details that require precise and even nailing. A 15 gauge finish nailer is ideal for these types of projects, as it’s able to shoot fine nails from 1-2″ in length at an angle – perfect for attaching molding and trim to cabinets without marring the surface. gauge nails can cause serious injury to a person. Ten of thousands of injuries are caused yearly by nail guns, so you can never be too safe when operating a finish nailer . gauge finish nails have a diameter of 0.072 inches making them versatile for a wide range of projects.