It protects against the rain and sunshine too, so your wood is less likely to weather and grey and will instead look better for longer. ULTIMA-PLUS XP MY1356 Patio Cleaner & Green Mould And Algae Remover: A powerful and concentrated wood and other hard surface cleaner. One 5L bottle makes a minimum of 50L of solution covering a huge 400m² area. It can also be diluted to make up to 95L of solution Now it’s time to apply the paint or stain. It’s best to use a roller for this, but you can use a brush for smaller areas. Many people have also used an airless sprayer with good results. Just be aware that the paint or stain will not go as far if you use this method. Give it a good scrub with a stiff brush. Scrub along the grooves and also across them to help loosen the old coating. Pour on some water and keep scrubbing. This will help lift the finish completely off. We may earn commission from our brand partners when purchasing products through our links. Learn more.

A product made from a long-lasting tintable acrylic base material with UV inhibitors and added solids (aluminum oxide or sand). The solids provide texture and hold the product together, like aggregate in concrete.You don’t need any special skills to use them. You just need to know how to use a paintbrush, roller, or airless sprayer. Then, just follow the instructions on the product. Bosch High Pressure Washer EasyAquatak 120: an efficient, robust, stable and space-saving pressure washer. Makes light work of a wide range of outdoor cleaning tasks. Concentrated power removing stubborn dirt and the Fan Jet for rinsing and general cleaning. For the best possible results you’ll want a pressure washer but scrubbing hard works fine too. Simply dilute it down a bit if you like and spray it on with a pressure sprayer. A cautionary word that you may change the colour of your timber temporarily until you stain or oil it again. The result is normally something near new. Pros: You also have to decide what color you want. Some resurfacers come only in a selected range of colors. Others require you to add the tint that you want. Therefore, if you have a particular color in mind, make sure that the resurfacer you select has that color option. Tips For Applying The Resurfacer First, you have to wash the surface that you want to paint or stain. It’s easy to do this with a pressure washer. You should give the pressure-treated wood a little time to dry so that the paint or stain you’re applying will adhere to the surface. Step 2

You might need to keep scrubbing with a wire brush to get rid of the particularly stubborn sections. Leave it to work for around 30 minutes, keeping an eye out for any patches that start to dry out. If this happens, re-apply on these areas. They’re also more slip-resistant which is important to consider if you have young children or elderly people living in your home. All the products that we’ve reviewed are water-based. This means that they’re easy to use and very durable. In this range, you can choose from acrylic, latex, silicone, and silicate.Stains are also really durable against footfall. They create a tough layer over the top of the wood so they can cope with a lot of footfall. However, this layer can become slippery when wet. When you compare it to the Everbuild you won’t have any issues at all with the quality. Both are up to the job of killing and loosening Algae and mould, taking a fair bit of the strain out of the process. I’ll say it again though, with volume it’s probably even more important – you could do with a jet washer to lighten the load. Pour solution into a pump sprayer then spray over the entire surface you need to clean. For best results agitate with a stiff bristled brush and leave to work for 10 – 20 minutes. Agitate with a stiff bristled brush then wash the area down fully to neutralise the area.