Also use on connections for your cell phones, PDA's, MP3 Players, Cordless Phones and Mobile Radios.

I had some daughter boards come out of thermal cycle and I was having problems with them passing test. My thought was, cheap, bad connectors warped during all those hot/cold cycles. the company had this woman, I know for a fact she was over 70, that had worked with the company forever, like, employee #1 or something, before I was born I know, and her job, no sh!t, was to do detail solder repairs on stuff others messed up and could not do, I’m talking repairing 8mm traces, replacing vias, components, on 4 layer PCBs. Stuff that should go into the trash but was waaaaay to expensive to scrap. Improves conductivity and reduces intermittent connections. Reduces arcing, RFI, wear and abrasion. Cleaner Audio – Clearer Video – Reliable Data. I must have lived in a oxygen poor and dust free home because non of my consoles or games never needed “blowing”. There will be one or more small holes in the outer metal case of each Pot. These may be drilled holes, or just openings created where the metal cases had little tabs bent inwards to hold them on. It doesn't matter; just find one or more small holes that give access to the inside of the pot. A! The two product lines (probably more products depending on the area needed), would be our DeoxIT® D-Series and DeoxIT® L260D Grease.

Customer reviews

Freon is a brand name, for refrigerants made by Dupont. They use it for all sorts of different refrigerants with different boiling points. They explained to me that was the way to clean them since dust caused bad connections. No idea at the time, again, I never, ever had problems with my consoles to do such and argued that there wasn’t enough dust floating around to cause that kind of poor connection and that something was wrong with his connector inside of his console. No idea during that time about oxide corrosion. Use : Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible. It was the first widely used refrigerant. Because of its high boiling point (compared to most refrigerants), it can be used in systems with a low operating pressure, making the mechanical design of such systems less demanding than that of higher-pressure refrigerants R-12 or R-22. Error processing dynamic tag getAttribute('Assembly',1695,'nopricemessage2') : record assembly 1695 not found]

MOST OF THE TIME, you'll be fine just leaving the relays alone, so you may want to skip this if it intimidates you, but as long as you can get the case open easily, it is worth doing. I told her what was wrong, she pulled out a pencil and started erasing the gold plated connectors. I’m thinking, OK……. A DeOxit kit, with both spray can (with little red straw) and little bottle of red DeOxit, and the same for the yellowish DeOxit Gold (formerly called ProLube).So I prefer the 5 oz (142 gram) Deoxit D5 (which has more solvents and flushing action for cleaning) and/or Faderlube F5 (for more lube) for just about all my cleaning applications. Just my preference. Improves connector performance/reliability. Temperature range: -34 to +200oC. Spray, adjustable valve (L-M-H) – Flushing Action, and Safe on Plastics. DeoxIT7 D100L concentrate has approximately 20% chemical cleaning action. Excellent cleaning/deoxidizing, good protection, no ozone depletion. I received a message recently from a fellow AKer, asking me to re-post this semi-ancient post that has been long buried in the archives. While reluctant to re-post anything already in the archives (and thus risk wasting AK's precious memory space), I decided that with just a bit of modification, maybe it can help some of the many newbies here who ask periodically (and repeatedly) about DeOxit and how to use it. I'd like to add pics to it, but that will take a lot of time, so for now, with just a few minor changes from the original, here is re-presented... I won't detail the process for removing the faceplate itself on a particular model, but give general instructions, as it will vary from model to model and usually isn't necessary, anyway.

Anyway, as time went on, I saw this “solution” being performed more and more until it seemed to spread across country, if not world wide. And as with all procedures there will be those who will recommend Faderlube or D100 (100% deoxit) only for the rotary pots to be safest. Use DeoxIT when your musical equipment is experiencing loss, such as turning a potentiometer or a switch and creating an unpleasant noise, even a cable connector. DeoxIT can be used on an instrument or any other electronic hardware that relies on knobs and switches, which are prone to dust and oxidation from exposure to atmospheric changes. Likewise, if there are any intermittencies in your signal or if your power supplies are not lasting as long as they should, a spray or wipe of DeoxIT will go Where to Apply CAIG DeoxIT D5

The key to Deoxit D5

The key with any conductivity enhancer is to use it sparingly. A little goes a long way. Small quantities of it help metal to retain or regain its conductive properties. But like any oil, too much of it makes it an insulator, completely defeating the purpose. When you flood a connection with it, your only recourse is to let it evaporate, or clean it off as best you can with a solvent like mineral spirits.