NOTE: Unplug electrical appliances before using this product to clean them. Not suitable for unsealed wood, marble or granite surfaces. Spot test all other surfaces in an inconspicuous area. Safe for all finished, sealed surfaces. If using on electronic equipment, spray product directly onto cloth and follow manufacturer instructions. Before using on an unknown surface, test on an inconspicuous If using on electronic equipment, spray product directly onto cloth and follow manufacturer instructions.

Cleans most hard surfaces* by removing dust, smears, fingerprints and messes without leaving streaks or residue, and without damaging surfaces. I wanted a polish not an air freshener so I plumped for this over the Jasmine fragranced one...BIG mistake. This smells like RAID fly and wasp killer! Apply product neat, directly to floor and spread evenly. If applying a second coat, wait at least 4 hours for product to cure. Please Note: this product is not suitable for use on unsealed surfaces or those sealed with oil. If in doubt please test in an inconspicuous area first.

Not recommended for: unsealed, untreated, or oil-treater wood, cork and other non-washabke surfaces Formally Klear Floor Wax, this Expert Care Pledge Multi-Surface Floor Polish is a dual-purpose formula that shines and deep-cleans your floor. There is no buffing or rinsing required when used on Sealed Wood and other washable surfaces, and you will be left with a transparent protective layer. A solid household favourite for keeping almost all hard floors and surfaces clean and glossy it is also popular amongst modellers for finishing wooden parts. Argentina - Español Canada - Français Canada-English Chile - Español Colombia - Español Ecuador - Español Italy - Italiano Mexico - Español Peru- Español Philippines - English Poland - Polski Puerto Rico - Español South Africa - English Spain - Español Turkey - Türkçe United States - English United States – Español All Countries To Shine: apply the product directly to the floor and distribute evenly.wait at least 4 hours before adding an optional second layer. Mix 500ml of ammonia with 2 litres of cool water and 2 capfuls of product. Apply to floor and wait 5 minutes before rinsing with cool water. Repeat if necessary.