If the boiler doesn't run when there is *only* a CH demand, it indicates either that the valve hasn't moved all the way to the CH position or that the microswitch isn't working. Very frustrating and don't know what else to do with the damn things other than to have a different make and model installed. I don't do it myself. I get a professional to do it - thank god I have an all-singing-all-dancing central heating insurance cover to deal with it. At the moment I am assuming that the valve is in the mid way position (otherwise we wouldn't be getting hot water from the tank and some heat from the radiators) and the strange behaviour of the heating is because it only works when the programmer for the hot water is on. The system is a conventional gravity-fed system with gas condensing boiler, Lifestyle LP522 programmer, Drayton RTS1 room-stat, Honeywell tank-stat, Drayton MA1 MPV and ACL Lifestyle Wiring Centre.

The system has been working perfectly for 14 years until yesterday when the domestic hot water was cold.

Problems with Drayton mid position actuator

With power applied to the white wire only, it will move to the mid position for hot water and heating. From what you say, does the actuator stay in the H position when the demand is satisfied when the timer is still on (as well as when the timer shuts off) and if so, what is keeping it 'actuated' there and thus stopping the spring pressure from returning it to the W position? Last night my partner heard a very strange buzzing whiring noise coming from what i now know is the "mid position actuator" . Edit: I've just done some more investigating this morning. The problem of the pump continuing to run last night, doesn't appear to occur when I try it now. I unplugged the MPV and it caused the pump to switch off and the valve return to its default W.

As my MPV position indicator is 'hidden' from view, I had never realised that the MPV stayed in the last position demanded by the system and concluded, wrongly, that I had found the cause of the cold shower; assuming that the MPV had not moved when demanded. I had always thought that the MPV only moved to the H position when heating was demanded. One year ago (almost to the day) the Drayton MA1 mid-position actuator was replaced (4 years old) on my central heating system as it wasn't operating correctly. It was replaced with another MA1 and the problem was solved. However, I have just switched on my central heating for the first time this year and find that I always get CH with HW even when the CH timer is off. I looked at the MA1 and can see that the valve position is in the middle (HW+CH). If I unsnap the actuator from the valve I can turn the valve manually. I then tried the following with the MA1 removed:That is, there is a shared (flow) valve which has to open to allow any water to flow, then a second 3 way valve which decides which way the water will flow.

The problem I am having though is even after the temperature set by thermostat has been reached, and after the scheduled CH OFF, my pump continues to operate, my radiators continue to heat and the temperature continues to increase. That was why I came here and my misunderstanding has now been corrected thanks to John and flameport!Now some heat is getting to the cold radiators. The new (compared to the others) double radiator is doing something I haven't encountered before. The rear part is heating up but the front part is staying cold. It doesn't have air in because I have bled it (amazingly after a long search I found a bleed screw) and it was full of water. If the valve was previously at Heating only, the result is the valve being held in that position, so finding the valve at H with no demand after using the heating is normal operation and exactly what you would expect. At the moment, there is nothing wrong with the system, thank goodness. It was a case of putting two and two together and coming up with five. The water was very cool when I showered and so I advanced the timer to heat it up. The boiler was working fine as I had the heating on at the same time. I turned off the power to the system and immediately the actuator returned to the relaxed, Water, position under spring pressure. With the head unit removed from the valve body, turning on the system and demanding Heating causes the actuator to move to the H position. Turning down the room stat satisfies the demand and the system shuts down the boiler and the pump but the actuator remains in the H position. Cycling the demand fires the boiler and pump but satisfying the demand with the room-stat has no effect on the actuator which stubbornly remains in H.