When you need to drill holes in masonry larger than the 13mm maximum of the combi drill, you can use the rotary hammer drill that allows you to drill up to 24mm holes in concrete. The drill has an SDS-Plus bit holder that is compatible with thousands of different drill bits. Application control is achieved through 3 motor speeds and torque settings including 'PrecisionDrive' All these tools need somewhere to be stored and transported. That's where the T-Stak cases come in, which all clip securely together. Starting at the bottom, there is a large T-Stak case with durable wheels and a telescopic handle. The next cases are the deep T-Stak cases, and the final one is a standard shallow case which can fit two or three tools, and is ideal to take with you on more mobile jobs. PrecisionDrive mode offers additional control in screwdriving applications to avoid material and fastener damage

Got the material down to the right size, but need to round over the corners to not only make them nicer to the touch, but last longer, then the router will give you the ability to make these complicated cuts without needing to have a power cord. x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

18V 3 x 5.0Ah Li-ion XR BL Kit 7pc

Didn't quite get the timber to the right width, but only need to take off a small amount of material for it to fit, then the planer will help you sneak up on that perfect dimension with high quality blades.

PrecisionDrive' mode offers additional control in screwdriving applications to avoid material and fastener damage It has a bright LED light that illuminates dark work surfaces for accurate cutting, whilst the depth control straight cut guide increases cutting accuracy for detailed work. x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. The DeWalt DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. Compact 300w motor delivers 0-20,000 oscillations per minute, providing faster completion of the most demanding tasks

DeWalt DCK755P3T 18v XR Cordless 7 Piece Power Tool Kit Inc 3x 5.0Ah Batteries, 1x Charger, 2x TSTAK Cases & 1x TSTAK Trolley

Built in no-volt release gives protection against accidental start ups when new battery is installed Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal Brushless motor with high capacity XR 5.0Ah 18V Lithium-ion battery platform for extreme runtime and reduced maintenance Electronic clutch for consistently-high torque and improved durability

x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.For making long cuts in sheet materials and lengths of timber, the circular saw can make a maximum cut depth of 64mm or bevel up to 57 degrees. It takes great value 184mm blades with 16mm bores and is easy to adjust as needed. Hand / Arm Vibration: Drilling 6.6m/s², Chiselling: 5.4m/s², Metal: 2.5m/s², Uncertainty: K1/K2/K3 (Vibration): 1.5m/s². The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. Variable speed control and dual grip position allows for a simple soft start function, and better application control

Compact 300w motor delivers 0-22,000 oscillations per minute, providing faster completion of the most demanding tasks DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. The oscillating multi-tool gives you the ability to sand, cut and scrape in tight and awkward places. It comes with a set of 29 accessories to get you started right away.

Not Right? Try One Of These Instead

Cut away guard lifts when in use for increased visibility. When not in use it covers the blade for safer storage Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal Variable speed control and dual grip position. Allows for a simple soft start function, and better application control